?
This document uses PHP Chinese website manual Release
在頭文件<string.h>中定義 | ||
---|---|---|
(1) | ||
char * strcpy(char * dest,const char * src); | (直到C99) | |
char * strcpy(char * restrict dest,const char * restrict src); | (自C99以來) | |
errno_t strcpy_s(char * restrict dest,rsize_t destsz,const char * restrict src); | (2) | (自C11以來) |
1)將由src指向的空終止字節字符串(包括空終止符)復制到第一個元素由dest指向的字符數組中。
如果dest數組不夠大,行為是不確定的。 如果字符串重疊,則行為未定義。 如果dest不是指向字符數組的指針,或者src不是指向以空字符結尾的字節字符串的指針,則行為是未定義的。
2)與(1)相同,除了可以用未指定的值來摧毀目標數組的其余部分,并且在運行時檢測到以下錯誤并調用當前安裝的約束處理函數:
src
或者dest
是空指針
destsz
是零或大于 RSIZE_MAX
destsz
小于或等于strnlen_s(src, destsz)
; 換句話說,會發生截?cái)?/p>
源和目標字符串之間會發生重疊
如果由dest <= strnlen_s(src,destsz)<destsz;指向的字符數組的大小,行為是未定義的。 換句話說,destsz的錯誤值不會暴露即將發生的緩沖區溢出。 作為所有邊界檢查函數,只有當__STDC_LIB_EXT1__由實現定義并且在包含string.h之前用戶將__STDC_WANT_LIB_EXT1__定義為整數常量1時,strcpy_s才能保證可用。
dest | - | 指向要寫入的字符數組的指針 |
---|---|---|
src | - | 指向要從中復制的以null結尾的字節字符串 |
destsz | - | 最大寫入字符數,通常是目標緩沖區的大小 |
1)返回dest
副本
2)在成功時返回零,錯誤時返回非零值。 此外,如果出錯,則將零寫入dest [0](除非dest為空指針或destsz為零或大于RSIZE_MAX)。
允許strcpy_s從最后一個寫入destsz的字符中截?cái)嗄繕?biāo)數組,以提高效率:它可以復制多字節塊,然后檢查空字節。
函數strcpy_s與BSD函數strlcpy相似,除以下情況:
strlcpy
截?cái)嘣醋址赃m應目標(這是一種安全風險)
strlcpy
不執行所有的運行時檢查是strcpy_s
不會
strlcpy
通過將目標設置為空字符串或在調用失敗時調用處理程序不會使失敗變得明顯。
盡管strcpy_s由于潛在的安全風險而禁止截?cái)?,但可以使用bounds-checked strncpy_s來截?cái)嘧址?/p>
#define __STDC_WANT_LIB_EXT1__ 1#include <string.h>#include <stdio.h>#include <stdlib.h> int main(void){ char *src = "Take the test.";// src[0] = 'M' ; // this would be undefined behavior char dst[strlen(src) + 1]; // +1 to accomodate for the null terminator strcpy(dst, src); dst[0] = 'M'; // OK printf("src = %s\ndst = %s\n", src, dst); #ifdef __STDC_LIB_EXT1__ set_constraint_handler_s(ignore_handler_s); int r = strcpy_s(dst, sizeof dst, src); printf("dst = \"%s\", r = %d\n", dst, r); r = strcpy_s(dst, sizeof dst, "Take even more tests."); printf("dst = \"%s\", r = %d\n", dst, r);#endif}
可能的輸出:
src = Take the test.dst = Make the test.dst = "Take the test.", r = 0dst = "", r = 22
C11標準(ISO / IEC 9899:2011):
7.24.2.3 strcpy函數(p:363)
K.3.7.1.3 strcpy_s函數(p:615-616)
C99標準(ISO / IEC 9899:1999):
7.21.2.3 strcpy函數(p:326)
C89 / C90標準(ISO / IEC 9899:1990):
4.11.2.3 strcpy函數
strncpystrncpy_s(C11) | 將一定數量的字符從一個字符串復制到另一個字符串(函數) |
---|---|
memcpymemcpy_s(C11) | 將一個緩沖區復制到另一個(功能) |
wcscpywcscpy_s(C95)(C11) | 將一個寬字符串復制到另一個(函數) |
strdup(動態內存TR) | 分配一個字符串(函數)的副本 |
| 用于strcpy的C ++文檔 |
本文檔系騰訊云云+社區成員共同維護,如有問題請聯系 yunjia_community@tencent.com
在頭文件<wctype.h>中定義 | ||
---|---|---|
int iswdigit(wint_t ch); | (自C95以來) |
檢查給定的寬字符是否對應(如果縮?。┦畟€(gè)十進制數字字符0123456789中的一個。
CH | - | 寬字符 |
---|
如果寬字符是數字字符,則為非零值,否則為零。
iswdigit
與iswxdigit
是唯一不受當前安裝的C語言環境影響的標準寬字符分類函數。
一些語言環境提供了檢測非ASCII數字的附加字符類。
#include <stdio.h>#include <wctype.h>#include <wchar.h>#include <locale.h> void test(wchar_t a3, wchar_t u3, wchar_t j3){ printf(" '%lc' '%lc' '%lc'\n", a3, u3, j3); printf("iswdigit %d %d %d\n", !!iswdigit(a3), !!iswdigit(u3), !!iswdigit(j3)); printf("jdigit: %d %d %d\n", !!iswctype(a3, wctype("jdigit")), !!iswctype(u3, wctype("jdigit")), !!iswctype(j3, wctype("jdigit")));} int main(void){ wchar_t a3 = L'3'; // the ASCII digit 3 wchar_t u3 = L'三'; // the CJK numeral 3 wchar_t j3 = L'3'; // the fullwidth digit 3 setlocale(LC_ALL, "en_US.utf8"); puts("In American locale:"); test(a3, u3, j3); setlocale(LC_ALL, "ja_JP.utf8"); puts("\nIn Japanese locale:"); test(a3, u3, j3);}
輸出:
In American locale: '3' '三' '3'iswdigit 1 0 0jdigit: 0 0 0 In Japanese locale: '3' '三' '3'iswdigit 1 0 0jdigit: 0 0 1
C11標準(ISO / IEC 9899:2011):
7.30.2.1.5 iswdigit函數(p:449)
C99標準(ISO / IEC 9899:1999):
7.25.2.1.5 iswdigit函數(p:395)
isdigit | 檢查一個字符是否是一個數字(功能) |
---|
| 用于iswdigit的C ++文檔 |
ASCII 值 (十六進制) | 字符 | iscntrl iswcntrl. | isprint iswprint. | isspace iswspace. | isblank iswblank. | isgraph iswgraph. | ispunct iswpunct. | isalnum iswalnum. | isalpha iswalpha. | isupper iswupper. | islower iswlower. | isdigit iswdigit. | isxdigit iswxdigit. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 - 8 | 0x00-0x08 | 控制碼 (NUL, etc.) | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
9 | 0x09 | tab (\t) | ≠0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
10 - 13 | 0x0A-0x0D | 空格 (\n,\v,\f,\r) | ≠0 | 0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
14 - 31 | 0x0E-0x1F | 控制碼 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
32 | 0x20 | space | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
33 - 47 | 0x21-0x2F | !"#$%&'()*+,-./ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
48 - 57 | 0x30-0x39 | 0123456789 | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | 0 | 0 | 0 | ≠0 | ≠0 |
58 - 64 | 0x3a-0x40 | :;<=>?@ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
65 - 70 | 0x41-0x46 | ABCDEF | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | ≠0 |
71 - 90 | 0x47-0x5A | GHIJKLMNOPQRSTUVWXYZ | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | 0 |
91 - 96 | 0x5B-0x60 | []^_` | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | | ||||||||||||
97 -102 | 0x61-0x66 | abcdef | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | 0 | ≠0 | 0 | ≠0 |
103-122 | 0x67-0x7A | ghijklmnopqrstuvwxyz | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | 0 | ≠0 | 0 | 0 |
123-126 | 0x7B-0x7E | {|}~ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
127 | 0x7F | 退格 (DEL) | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |