Windows Recovery Environment (WinRE) is an environment used to repair Windows operating system errors. After entering WinRE, you can perform system restore, factory reset, uninstall updates, etc. If you are unable to boot into WinRE, this article will guide you through fixes to resolve the issue.

Unable to boot into Windows Recovery Environment

If you are unable to boot into the Windows Recovery Environment, please use the fix provided below:

Below, we have explained all these fixes in detail.

1] Check the status of the Windows recovery environment

You can enable or disable the Windows Recovery Environment by executing the corresponding command in a command prompt with administrator rights or a PowerShell window with administrator rights. If this recovery environment is disabled, the system will not boot to this environment. Be sure to check the status of the Windows recovery environment.

Launch an elevated Command Prompt or elevated PowerShell and type the following command. After that, press Enter key.

代理c/信息

Windows RE status should show Enabled. If it says disabled, run the following command from an elevated command prompt and press Enter.

代理c/啟用

2]Use other methods to enter the Windows recovery environment

There are multiple ways to enter the Windows recovery environment. Try all of these methods and see if you succeed. You can achieve this by:

• Interrupt the normal boot process
• Restart using Shift
• Using the Settings App
• Using a bootable USB drive

To interrupt the normal boot process, perform the following steps:

Repeat the above steps until you see the Prepare to Automatically Repair screen. Now, you are in WinRE.

Alternatively, click the Start button and then click the Power icon. Now, hold down the Shift key and click Restart.

In Windows 11, open Settings and then go to System >Recovery. Now, click Restart now under Advanced startup options.

To enter the Windows recovery environment from USB, you must create a bootable USB drive using the Windows 11/10 operating system (whichever applies to your situation). Then, change the boot order to boot from the USB drive. When you boot from USB, click Next and select Repair your computer.

3] Have you accidentally deleted your Windows recovery partition?

The Windows recovery partition is created when you install Windows or upgrade Windows from a lower version to a higher version, such as from Windows 10 to Windows 11. If you delete the recovery partition on Windows 11/10, you will not be able to boot into the recovery environment. To check this, you can take the help of the built-in tool Disk Management.

Open Disk Management and see if the recovery partition is displayed there. If not, you may have deleted the recovery partition by mistake. You can also find multiple recovery partitions on the disk. If the recovery partition is not available, you will need to perform an in-place upgrade or clean installation of Windows.

5]Perform an in-place upgrade or clean installation of Windows

In-place upgrade is the process of installing a Windows operating system without deleting the currently installed Windows operating system. This process does not delete data. We recommend that you perform an in-place upgrade and see if that helps.

If the problem cannot be resolved with an in-place upgrade, the last resort is to perform a clean installation of Windows. If you selected the correct drive when formatting your C drive for a fresh installation of Windows, this process will delete all data in your C drive.

You need a bootable USB drive in Windows operating system to perform the above two methods.

that's all. I hope this helps you.

How to force Windows to restore the environment?

There are many ways to enter the Windows recovery environment. If you are unable to enter WinRE, you can force your system by interrupting the normal boot process. Alternatively, you can also use a bootable USB drive on Windows operating systems.

How to start in safe mode?

Safe mode is a troubleshooting mode that loads the Windows operating system with a minimal set of drivers. You can boot into safe mode using the MSCONFIG application. Alternatively, you can boot into Safe Mode using the Windows Recovery Environment.

Read next: Could not find the Recovery Environment in Windows.

The above is the detailed content of Unable to boot into Windows recovery environment. For more information, please follow other related articles on the PHP Chinese website!