The loud mouse sound can be solved by changing the micro movement, cleaning the roller or changing the mouse pad. The mouse button sound is mainly due to micro-movement materials or aging. The machine can be used to replace the silent micro-movement such as TTC or POM material. The roller noise is mostly caused by dust accumulation or wear of gears. It can be cleaned with alcohol and applied with silicone-based grease. The desktop material affects sound feedback, and using soft pads or cloth mouse pads can effectively reduce noise; if the mouse is old and cannot be repaired, it is recommended to replace the silent model such as Logitech M330.
Your mouse is too loud when used, which is really annoying. In fact, this problem is very common, especially when a mechanical mouse or a mouse that has been used for a long time, the clicking sound will be particularly obvious. There is a solution, the key is to figure out where the sound comes from and then prescribe the right medicine.
The mouse button is too loud, you can try to replace the micro-move
The most common "click" sounds heard by the mouse basically come from the slight movement of the left and right keys (that is the small part that makes a crisp sound when pressed). Some mice use high decibel micro-movements in their factory. For example, the old OMRON micro-movements will make the sound more loud; over time, the wear of the spring may also make the sound more harsh.
Solution:
- Disassemble the mouse to see the model and change to a set of silent micro-movements (such as TTC's silent model or POM material's micro-movements)
- There are many modification tutorials for common mouse on the Internet. You can find it by searching on B and YouTube.
- If you don't want to do it, you can also buy a silent mouse directly. Models like Logitech M330 that are mainly designed for silent design are very suitable for office environments
Note: Changing micro-move requires a little hands-on ability. The tools and welding skills should not be too bad, otherwise it will be easy to break the mouse.
The mouse wheel sounds loud, which may be loose structure or wear gears
The sound of the roller is usually not as high as the buttons, but if there is a "crying" friction sound or a noise when turning, it is also a headache. This situation is mostly due to the aging, accumulation of dust, or the internal structure is loose.
Countermeasures:
- Use a cotton swab to dip it in alcohol and gently wipe off the dust on the edge of the roller
- If it is a removable roller design, you can try adding some lubricant to the gear (silicon-based grease is recommended, not engine oil)
- Check whether the roller is loose. If the structure has been severely deformed, you may only be able to replace the roller assembly or the entire upper cover.
Some mouse rollers are plastic parts themselves, and they will inevitably make sound over time, especially in low temperature environments that are more likely to become brittle.
Mouse pad or desktop material affects click feedback sound
Have you noticed that using the same mouse on different desktops will make the sound different? For example, the sound of tapping on a glass or metal table will be amplified, while it is much lighter to put it on a soft-cushioned or wooden table. This is actually a matter of sound reflection.
You can try these methods:
- Put a soft rubber pad or mouse pad under the mouse to effectively buffer some sound
- Using a mouse with a rubber bottom can also play a certain role in noise reduction.
- If you are working in a shared space, such as an office or library, choosing a cloth mouse pad will be much quieter than a hard pad
Although this method does not involve dismantling the machine, it is low in cost and fast in effect, and is suitable for those who don’t want to struggle.
Basically these common solutions. If your mouse has been used for several years, there is no need to force it if you can't afford it. Changing a new mouse is also an option. The key is to choose the right accessories, such as silent micro-movement, appropriate roller material and structural design, so as to reduce noise from the source.
The above is the detailed content of how to fix my mouse is too loud. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
Windows Security is blank or not showing options
Jul 07, 2025 am 02:40 AM
When the Windows Security Center is blank or the function is missing, you can follow the following steps to check: 1. Confirm whether the system version supports full functions, some functions of the Home Edition are limited, and the Professional Edition and above are more complete; 2. Restart the SecurityHealthService service to ensure that its startup type is set to automatic; 3. Check and uninstall third-party security software that may conflict; 4. Run the sfc/scannow and DISM commands to repair system files; 5. Try to reset or reinstall the Windows Security Center application, and contact Microsoft support if necessary.
PEAK Voice Chat Not Working on PC: Check This Stepwise Guide!
Jul 03, 2025 pm 06:02 PM
Players have been experiencing the PEAK voice chat not working issue on PC, impacting their cooperation during climbs. If you are in the same situation, you can read this post from MiniTool to learn how to resolve PEAK voice chat issues.Quick Navigat
Windows stuck on 'undoing changes made to your computer'
Jul 05, 2025 am 02:51 AM
The computer is stuck in the "Undo Changes made to the computer" interface, which is a common problem after the Windows update fails. It is usually caused by the stuck rollback process and cannot enter the system normally. 1. First of all, you should wait patiently for a long enough time, especially after restarting, it may take more than 30 minutes to complete the rollback, and observe the hard disk light to determine whether it is still running. 2. If there is no progress for a long time, you can force shut down and enter the recovery environment (WinRE) multiple times, and try to start repair or system restore. 3. After entering safe mode, you can uninstall the most recent update records through the control panel. 4. Use the command prompt to execute the bootrec command in the recovery environment to repair the boot file, or run sfc/scannow to check the system file. 5. The last method is to use the "Reset this computer" function
Proven Ways for Microsoft Teams Error 657rx in Windows 11/10
Jul 07, 2025 pm 12:25 PM
Encountering something went wrong 657rx can be frustrating when you log in to Microsoft Teams or Outlook. In this article on MiniTool, we will explore how to fix the Outlook/Microsoft Teams error 657rx so you can get your workflow back on track.Quick
The requested operation requires elevation Windows
Jul 04, 2025 am 02:58 AM
When you encounter the prompt "This operation requires escalation of permissions", it means that you need administrator permissions to continue. Solutions include: 1. Right-click the "Run as Administrator" program or set the shortcut to always run as an administrator; 2. Check whether the current account is an administrator account, if not, switch or request administrator assistance; 3. Use administrator permissions to open a command prompt or PowerShell to execute relevant commands; 4. Bypass the restrictions by obtaining file ownership or modifying the registry when necessary, but such operations need to be cautious and fully understand the risks. Confirm permission identity and try the above methods usually solve the problem.
The RPC server is unavailable Windows
Jul 06, 2025 am 12:07 AM
When encountering the "RPCserverisunavailable" problem, first confirm whether it is a local service exception or a network configuration problem. 1. Check and start the RPC service to ensure that its startup type is automatic. If it cannot be started, check the event log; 2. Check the network connection and firewall settings, test the firewall to turn off the firewall, check DNS resolution and network connectivity; 3. Run the sfc/scannow and DISM commands to repair the system files; 4. Check the group policy and domain controller status in the domain environment, and contact the IT department to assist in the processing. Gradually check it in sequence to locate and solve the problem.
the default gateway is not available Windows
Jul 08, 2025 am 02:21 AM
When you encounter the "DefaultGatewayisNotAvailable" prompt, it means that the computer cannot connect to the router or does not obtain the network address correctly. 1. First, restart the router and computer, wait for the router to fully start before trying to connect; 2. Check whether the IP address is set to automatically obtain, enter the network attribute to ensure that "Automatically obtain IP address" and "Automatically obtain DNS server address" are selected; 3. Run ipconfig/release and ipconfig/renew through the command prompt to release and re-acquire the IP address, and execute the netsh command to reset the network components if necessary; 4. Check the wireless network card driver, update or reinstall the driver to ensure that it works normally.
How to fix 'SYSTEM_SERVICE_EXCEPTION' stop code in Windows
Jul 09, 2025 am 02:56 AM
When encountering the "SYSTEM_SERVICE_EXCEPTION" blue screen error, you do not need to reinstall the system or replace the hardware immediately. You can follow the following steps to check: 1. Update or roll back hardware drivers such as graphics cards, especially recently updated drivers; 2. Uninstall third-party antivirus software or system tools, and use WindowsDefender or well-known brand products to replace them; 3. Run sfc/scannow and DISM commands as administrator to repair system files; 4. Check memory problems, restore the default frequency and re-plug and unplug the memory stick, and use Windows memory diagnostic tools to detect. In most cases, the driver and software problems can be solved first.
