The error code "0x8007000B" is usually caused by a USB flash drive format problem or system file exception. Solutions include: 1. Repartition and formatting using disk management tools; 2. Check and adjust the USB flash drive file system to FAT32 or exFAT; 3. Ensure that the complete and correct ISO image and professional writing tools are used; 4. Update the driver or temporarily close the security software to eliminate interference.

This error code "0x8007000B" usually appears in Windows systems, especially when trying to format the USB flash drive, install the system, or perform certain file operations. It prompts "wrong module type" or "invalid EXE signature". To put it bluntly, the system finds that something is wrong when processing a file or device.

The most common causes of this problem include: U disk partition table corruption, file system incompatibility, boot area abnormalities, or some system files are corrupted. The following is a few common scenarios to explain how to solve this problem.

1. Repartition using the Disk Management Tool

In many cases, problems with the USB drive itself lead to abnormal system recognition. You can fix it through the disk management that comes with Windows:

• After inserting the USB disk, press Win R to enter diskmgmt.msc to open disk management
• Find your USB drive (be careful not to choose the wrong one)
• Right-click to select "Delete Volume" (if there are multiple partitions, delete them all)
• Then right-click the unallocated space and "Create a new simple volume"
• Follow the wizard to set the size and drive letters and format it as FAT32 or exFAT

If the operation cannot be done normally, you can also try the command line method:

 diskpart
list disk
select disk X # X is your USB drive number clean
create partition primary
format fs=exfat quick
Assign

2. Check whether the file system matches

Sometimes the USB drive you use is in NTFS format, but some old devices (such as car audio and old cameras) only support FAT32, and an error may be reported when inserting the device. The same goes for the other way around - if you are working on a system boot disk and the USB disk is not FAT32, you may also encounter "0x8007000B".

The solution is simple:

• Open Explorer after inserting the USB flash drive
• Right-click on the USB flash drive → select "Format"
• Select FAT32 or exFAT in the file system
• Check "Quick Format" and start

Note: Some USB drives have large capacity (such as above 64G), and Windows does not support FAT32 formatting by default. It can be implemented using third-party tools such as Rufus or GUIFormat .

3. Check whether the ISO image or installation source is complete

If you are reporting an error "0x8007000B" when making a boot disk or installing Windows, it may be that there is a problem with the ISO file. Common scenarios include:

• The downloaded image is corrupted
• ISOs obtained using unofficial channels
• ISO writing method is wrong (such as not using the correct tool)

suggestion:

• Download genuine ISO on Microsoft's official website
• Use professional tools like Rufus or Ventoy to write to USB flash drive
• Make sure that the correct partitioning scheme is selected (UEFI/GPT or Legacy/MBR)

4. Update the driver or turn off the antivirus software

Sometimes old system drivers or intercept security software can also cause this type of error. You can try:

• Update USB controller driver
• Turn off third-party antivirus software or firewall
• Temporarily disable Windows Defender (temporary test)

Basically these are the methods. Most of the cases are caused by USB drive format or mirroring problems. You can basically solve the problem by step by step according to the above method. If important data is not involved, resetting or formatting is the most direct way.

The above is the detailed content of How to fix '0x8007000B' format error?. For more information, please follow other related articles on the PHP Chinese website!