When encountering the "CLOCK_WATCHDOG_TIMEOUT" error, the main reason is that the system detects that the processor core or thread is stuck, which is commonly found on the blue screen. You can follow the following steps to troubleshoot: 1. Check and update the motherboard BIOS to the latest version to avoid compatibility issues; 2. Turn off hyperthreading in the BIOS or disable Windows core isolation function, and set the power plan to "high performance"; 3. Use memory diagnostic tools to check memory problems, check CPU temperature, and eliminate hardware instability factors; 4. Roll back or uninstall recently installed drivers, especially graphics cards, network cards and virtualization-related drivers to eliminate software conflicts.

I encountered the "CLOCK_WATCHDOG_TIMEOUT" error. Usually, when the Windows system checks the processor response, it finds that a core or thread is stuck, causing the system to think it has crashed. This error is common in Blue Screen (BSOD), and the main reasons include hardware problems, driver conflicts, improper BIOS settings, etc. Below are some practical troubleshooting and repair methods.

Check and update the BIOS

This problem is sometimes because the motherboard's BIOS version is too old, does not support the current operating system features or has known compatibility issues.

• Enter the official motherboard website and find the latest BIOS version corresponding to your motherboard model
• If there is an update, follow the official instructions to upgrade (be careful not to lose power)
• It is recommended to back up the original BIOS settings before update

Some motherboard manufacturers will fix issues related to CPU clock synchronization in the new BIOS, which is one of the key points that trigger this error.

Disable hyperthreading or adjust power management settings

In some cases, the CPU's hyperthreading function or energy-saving mechanism will cause the system to misjudgment the core to be unresponsive.

You can try:

• Enter the BIOS and turn off the Hyper-Threading function
• Or disable advanced security features such as Core Isolation in Windows
• Adjust the power plan to "high performance" to avoid response delays caused by system frequency down

These settings will affect the system resource scheduling method and sometimes can effectively alleviate the watchdog timeout problem.

Check hardware issues: memory and CPU

Since this error involves the underlying clock detection mechanism of the system, hardware instability is a common cause.

• Check memory issues with Windows Memory Diagnostic
• Or run MemTest86 for more thorough testing
• Check whether the CPU temperature is abnormal, high temperature may cause instability
• Try replacing memory stick or slot to troubleshoot poor contact problems

If you have recently changed your CPU or memory, you might as well restore it to the same level to see if there are still problems.

Uninstall or roll back the recently installed driver

Third-party drivers, especially graphics cards, network cards, and antivirus software-related drivers, may interfere with the core clock mechanism of the system.

• Open Device Manager to see if there are recent update drivers
• Right-click to select "Rollback Driver" to previous version
• Or temporarily uninstall non-essential drivers (such as virtual network card, peripheral driver)

Especially if this problem occurs after using virtualization-related software (such as VMware and Docker), you can try to turn off or update its supporting drivers.

Basically these common solutions. Although it seems a bit complicated, most cases can be started with BIOS updates and driver checks, and the most likely problem points are eliminated first.

The above is the detailed content of How to fix 'CLOCK_WATCHDOG_TIMEOUT' error?. For more information, please follow other related articles on the PHP Chinese website!