1. Check whether the headphones are plugged in correctly, make sure to plug in the motherboard audio interface or replace the USB port; 2. Make sure the headphones are the default playback device; 3. Update or reinstall the audio driver; 4. Enable the disabled audio device. When Windows does not recognize headphones, you should first check whether the headphones are plugged in, try changing the jack, then confirm that the headphones are the default playback device in the sound settings, then update or reinstall the audio driver through the Device Manager, and enable the device that may be disabled in the sound control panel. If the problem is, there may still be hardware failure.
The problem of Windows not recognizing headphones is actually quite common, especially when there is no sound or the system does not respond after plugging in the headphones. This problem may be related to the driver, setup, or the hardware itself, but it can be solved in most cases.
Check if the headset is plugged in or try changing the jack
This is the easiest step to ignore. Sometimes the headset is not plugged tightly or the interface is inserted in the wrong way, and Windows will naturally not detect it. Confirm:
- Is the headset completely plugged into the audio interface (usually a green or pink 3.5mm jack)
- If it is a desktop computer, the jacks on the front panel and the rear motherboard sometimes have different functions. You can try changing to the jack on the back of the motherboard
- If you have USB headsets or headsets, try changing to USB mouth
Some laptops have loose jacks, which will disconnect if they sway slightly. You can also gently adjust the position of the headphone plug to see if there is any response.
Check sound settings and default devices
Even if the headset is plugged in, Windows may not set it as the default playback device. You can check this way:
- Find the volume icon in the lower right corner of the taskbar, right-click → "Open Sound Settings"
- Click "Sound Control Panel" (in "Related Settings")
- In the Play tab, check if your headset device appears (such as "Speaker/Earphones" or "Realtek High Definition Audio")
- If so, right-click to select "Set as default device"
If you don't see the headphone device, it may be a driver problem, read down.
Update or reinstall the audio driver
Many headphone recognition problems are actually caused by drivers. You can update the driver in the following ways:
- Press
Win Xand select Device Manager - Expand "Sound, Video, and Game Controllers"
- Right-click on Realtek, Conexant or other branded audio devices inside → select "Update Driver"
- If the update is invalid, you can try "Uninstall the device" and then restart the computer, and the system will automatically reinstall
If you are not sure which driver is audio-related, you can also directly search the official driver page of your computer model to download the latest version.
Enable disabled audio devices (hidden devices)
Sometimes Windows will misjudge the headset as a microphone, or the headset device is hidden by the system. This can be done at this time:
- Open the Sound Control Panel → Play tab
- Right-click the blank space → check "Show disabled devices"
- Check if there are any headphone devices displayed in gray. If there are, right-click → “Enable”
In addition, you can also do similar operations in the "Record" tab to ensure that the microphone part is fine.
Basically these are the methods. Most of the time, try it in sequence to solve the problem. If it still doesn't work, it may be that the headset is broken or there is a problem with the motherboard audio interface. You can use other headsets to test it.
The above is the detailed content of Windows not detecting headphones. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Windows Security is blank or not showing options
Jul 07, 2025 am 02:40 AM
When the Windows Security Center is blank or the function is missing, you can follow the following steps to check: 1. Confirm whether the system version supports full functions, some functions of the Home Edition are limited, and the Professional Edition and above are more complete; 2. Restart the SecurityHealthService service to ensure that its startup type is set to automatic; 3. Check and uninstall third-party security software that may conflict; 4. Run the sfc/scannow and DISM commands to repair system files; 5. Try to reset or reinstall the Windows Security Center application, and contact Microsoft support if necessary.
Windows stuck on 'undoing changes made to your computer'
Jul 05, 2025 am 02:51 AM
The computer is stuck in the "Undo Changes made to the computer" interface, which is a common problem after the Windows update fails. It is usually caused by the stuck rollback process and cannot enter the system normally. 1. First of all, you should wait patiently for a long enough time, especially after restarting, it may take more than 30 minutes to complete the rollback, and observe the hard disk light to determine whether it is still running. 2. If there is no progress for a long time, you can force shut down and enter the recovery environment (WinRE) multiple times, and try to start repair or system restore. 3. After entering safe mode, you can uninstall the most recent update records through the control panel. 4. Use the command prompt to execute the bootrec command in the recovery environment to repair the boot file, or run sfc/scannow to check the system file. 5. The last method is to use the "Reset this computer" function
Proven Ways for Microsoft Teams Error 657rx in Windows 11/10
Jul 07, 2025 pm 12:25 PM
Encountering something went wrong 657rx can be frustrating when you log in to Microsoft Teams or Outlook. In this article on MiniTool, we will explore how to fix the Outlook/Microsoft Teams error 657rx so you can get your workflow back on track.Quick
The RPC server is unavailable Windows
Jul 06, 2025 am 12:07 AM
When encountering the "RPCserverisunavailable" problem, first confirm whether it is a local service exception or a network configuration problem. 1. Check and start the RPC service to ensure that its startup type is automatic. If it cannot be started, check the event log; 2. Check the network connection and firewall settings, test the firewall to turn off the firewall, check DNS resolution and network connectivity; 3. Run the sfc/scannow and DISM commands to repair the system files; 4. Check the group policy and domain controller status in the domain environment, and contact the IT department to assist in the processing. Gradually check it in sequence to locate and solve the problem.
the default gateway is not available Windows
Jul 08, 2025 am 02:21 AM
When you encounter the "DefaultGatewayisNotAvailable" prompt, it means that the computer cannot connect to the router or does not obtain the network address correctly. 1. First, restart the router and computer, wait for the router to fully start before trying to connect; 2. Check whether the IP address is set to automatically obtain, enter the network attribute to ensure that "Automatically obtain IP address" and "Automatically obtain DNS server address" are selected; 3. Run ipconfig/release and ipconfig/renew through the command prompt to release and re-acquire the IP address, and execute the netsh command to reset the network components if necessary; 4. Check the wireless network card driver, update or reinstall the driver to ensure that it works normally.
How to fix 'SYSTEM_SERVICE_EXCEPTION' stop code in Windows
Jul 09, 2025 am 02:56 AM
When encountering the "SYSTEM_SERVICE_EXCEPTION" blue screen error, you do not need to reinstall the system or replace the hardware immediately. You can follow the following steps to check: 1. Update or roll back hardware drivers such as graphics cards, especially recently updated drivers; 2. Uninstall third-party antivirus software or system tools, and use WindowsDefender or well-known brand products to replace them; 3. Run sfc/scannow and DISM commands as administrator to repair system files; 4. Check memory problems, restore the default frequency and re-plug and unplug the memory stick, and use Windows memory diagnostic tools to detect. In most cases, the driver and software problems can be solved first.
Windows 11 KB5062660 24H2 out with features, direct download links for offline installer (.msu)
Jul 23, 2025 am 09:43 AM
Windows 11 KB5062660 is now rolling out as an optional update for Windows 11 24H2 with a few new features, including Recall AI in Europe. This patch is available via Windows Update, but Microsoft has also posted direct download l
How to repair Windows 11 using command prompt
Jul 05, 2025 am 02:59 AM
How to use command prompt to repair Windows 11? 1. Enter the command prompt through the recovery environment: enter the recovery environment through USB boot or three consecutive interrupts, and then select Troubleshooting > Advanced Options > Command Prompt; 2. Use DISM to repair the system image: Run DISM/Online/Cleanup-Image/CheckHealth to check for corruption, DISM/Online/Cleanup-Image/ScanHealth scanning problem, DISM/Online/Cleanup-Image/RestoreHealth to repair the problem, and specify an external source if necessary; 3. Run SF
