When Windows is stuck in the "Preparing Automatic Repair" interface, it is usually caused by system update failure, driver conflicts or hard disk problems. You can try the following methods to solve it: 1. Force restart 3 to 4 times to enter the recovery environment, use "Startup Repair" or execute bootrec command to repair system files; 2. Check whether the hard disk is damaged through WinPE boot, and run chkdsk to troubleshoot disk errors; 3. Enter the BIOS to turn off the fast boot and secure boot functions to troubleshoot loading problems, and restore the original settings when invalid. It is recommended to give priority to trying the above simple solution, and then consider reinstalling the system after it is invalid.
Windows is stuck in the "Preparing Automatic Repair" interface, which basically has problems during the system startup process. This usually occurs when the update fails, the hardware driver conflicts, or the hard drive has a bad channel. Don't rush to reinstall the system, try the following methods first.
1. Force restart several times to allow the system to enter the recovery environment
This method applies to most temporary errors. When you see that "Preparing Automatic Repair" is stuck for more than one or two hours (in fact, you can give up in half an hour), press and hold the power button directly to force shutdown, repeat 3 to 4 times. In this way, the system will think that there is a serious problem and will automatically enter the recovery environment (WinRE) the next time you boot.
After entering you can try:
- Use the Startup Repair tool
- Enter "Troubleshoot > Advanced Options > Command Prompt" to execute the command to repair system files
- If you know how to use the command, you can try
bootrec /fixmbr,bootrec /fixboot,bootrec /rebuildbcd
2. Check if there is any problem with the hard drive
"Preparing Automatic Repair" is stuck many times because there is a problem with the system disk. If you are using a mechanical hard drive, you can hear if there are any abnormal noises. If there is no sound but you can't get into the system, you can try to start with the PE tool to see if you can access the system partition.
Simple troubleshooting steps:
- Plug in a USB drive or external hard drive and use another computer to create a WinPE boot disk
- After booting, open the disk manager to check whether the C drive can be recognized normally.
- Try running the chkdsk command to check for disk errors
If there is a problem with the SSD, it may be caused by sudden power outage or frequent writes. In this case, it is recommended to back up the data as soon as possible and consider changing the disk.
3. Disable Quick Start and Safe Start Try
Some motherboards have "Fast Boot" and "Secure Boot" enabled by default, which sometimes cause Windows to fail to load properly.
Solution:
- Turn on the BIOS (usually F2/F10/Del keys)
- Find Power Management Setup and set Fast Boot to Disabled
- Turn off Secure Boot in Security Options
- Save and exit to see if you can enter the system normally
Note: The menu names of motherboards of different brands may vary slightly, but the general meaning is the same. After closing, you can change it back if the problem is not solved.
Basically these common ways of handling it. Don't panic when encountering this problem. Start with the easiest one, such as forced restart. If you really can't do it, then consider reinstalling the system, after all, that's a last resort.
The above is the detailed content of Windows preparing automatic repair stuck. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Windows Security is blank or not showing options
Jul 07, 2025 am 02:40 AM
When the Windows Security Center is blank or the function is missing, you can follow the following steps to check: 1. Confirm whether the system version supports full functions, some functions of the Home Edition are limited, and the Professional Edition and above are more complete; 2. Restart the SecurityHealthService service to ensure that its startup type is set to automatic; 3. Check and uninstall third-party security software that may conflict; 4. Run the sfc/scannow and DISM commands to repair system files; 5. Try to reset or reinstall the Windows Security Center application, and contact Microsoft support if necessary.
Windows stuck on 'undoing changes made to your computer'
Jul 05, 2025 am 02:51 AM
The computer is stuck in the "Undo Changes made to the computer" interface, which is a common problem after the Windows update fails. It is usually caused by the stuck rollback process and cannot enter the system normally. 1. First of all, you should wait patiently for a long enough time, especially after restarting, it may take more than 30 minutes to complete the rollback, and observe the hard disk light to determine whether it is still running. 2. If there is no progress for a long time, you can force shut down and enter the recovery environment (WinRE) multiple times, and try to start repair or system restore. 3. After entering safe mode, you can uninstall the most recent update records through the control panel. 4. Use the command prompt to execute the bootrec command in the recovery environment to repair the boot file, or run sfc/scannow to check the system file. 5. The last method is to use the "Reset this computer" function
Proven Ways for Microsoft Teams Error 657rx in Windows 11/10
Jul 07, 2025 pm 12:25 PM
Encountering something went wrong 657rx can be frustrating when you log in to Microsoft Teams or Outlook. In this article on MiniTool, we will explore how to fix the Outlook/Microsoft Teams error 657rx so you can get your workflow back on track.Quick
The RPC server is unavailable Windows
Jul 06, 2025 am 12:07 AM
When encountering the "RPCserverisunavailable" problem, first confirm whether it is a local service exception or a network configuration problem. 1. Check and start the RPC service to ensure that its startup type is automatic. If it cannot be started, check the event log; 2. Check the network connection and firewall settings, test the firewall to turn off the firewall, check DNS resolution and network connectivity; 3. Run the sfc/scannow and DISM commands to repair the system files; 4. Check the group policy and domain controller status in the domain environment, and contact the IT department to assist in the processing. Gradually check it in sequence to locate and solve the problem.
the default gateway is not available Windows
Jul 08, 2025 am 02:21 AM
When you encounter the "DefaultGatewayisNotAvailable" prompt, it means that the computer cannot connect to the router or does not obtain the network address correctly. 1. First, restart the router and computer, wait for the router to fully start before trying to connect; 2. Check whether the IP address is set to automatically obtain, enter the network attribute to ensure that "Automatically obtain IP address" and "Automatically obtain DNS server address" are selected; 3. Run ipconfig/release and ipconfig/renew through the command prompt to release and re-acquire the IP address, and execute the netsh command to reset the network components if necessary; 4. Check the wireless network card driver, update or reinstall the driver to ensure that it works normally.
How to fix 'SYSTEM_SERVICE_EXCEPTION' stop code in Windows
Jul 09, 2025 am 02:56 AM
When encountering the "SYSTEM_SERVICE_EXCEPTION" blue screen error, you do not need to reinstall the system or replace the hardware immediately. You can follow the following steps to check: 1. Update or roll back hardware drivers such as graphics cards, especially recently updated drivers; 2. Uninstall third-party antivirus software or system tools, and use WindowsDefender or well-known brand products to replace them; 3. Run sfc/scannow and DISM commands as administrator to repair system files; 4. Check memory problems, restore the default frequency and re-plug and unplug the memory stick, and use Windows memory diagnostic tools to detect. In most cases, the driver and software problems can be solved first.
Windows 11 KB5062660 24H2 out with features, direct download links for offline installer (.msu)
Jul 23, 2025 am 09:43 AM
Windows 11 KB5062660 is now rolling out as an optional update for Windows 11 24H2 with a few new features, including Recall AI in Europe. This patch is available via Windows Update, but Microsoft has also posted direct download l
How to repair Windows 11 using command prompt
Jul 05, 2025 am 02:59 AM
How to use command prompt to repair Windows 11? 1. Enter the command prompt through the recovery environment: enter the recovery environment through USB boot or three consecutive interrupts, and then select Troubleshooting > Advanced Options > Command Prompt; 2. Use DISM to repair the system image: Run DISM/Online/Cleanup-Image/CheckHealth to check for corruption, DISM/Online/Cleanup-Image/ScanHealth scanning problem, DISM/Online/Cleanup-Image/RestoreHealth to repair the problem, and specify an external source if necessary; 3. Run SF
