I encountered the problem that applications on Windows 10 will automatically close as soon as they are opened, which is usually caused by system settings, permissions, or file corruption. 1. First check whether the user account is an administrator, and try to run the application as an administrator, and confirm that the required permissions for the application are not disabled; 2. For built-in applications in the system, you can re-register and repair them through the PowerShell command; 3. Third-party applications can be uninstalled and reinstalled from the official website or repaired through the Microsoft Store; 4. Cleaning temporary files and caches is also an effective means, including cleaning of %temp%, prefetch and C:\Windows\Temp directories. Follow the above steps to check and most problems can be solved.
When an application on Windows 10 is automatically closed as soon as it is opened, it is usually not a problem with the application itself, but is caused by system settings, permissions or file corruption. The key to solving this type of problem is to check the specific causes and then prescribe the right medicine.
1. Check user account permissions and application access permissions
Some applications do not work properly under certain user accounts, especially those programs that require administrator rights or access to specific systems.
- Make sure you are using an administrator account
- Try right-clicking on the app icon → "Run as administrator"
- Go to "Settings" → "Privacy" → "Application Permissions" to check whether the relevant permissions are disabled (such as accessing files, cameras, microphones, etc.)
Sometimes some permissions will be reset after the system is updated, causing sudden errors in the application that can be run.
2. Re-register or repair the system application
Many built-in applications (such as "calculator", "mail", "photo", etc.) are run through system components. If they are damaged, you can try to fix them with the PowerShell command.
The method is as follows:
- Right-click the Start menu → Select "Windows Terminal (Administrator)" or open PowerShell and run as administrator
- Enter the following command and press Enter:
Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
This process may take several minutes, and try restarting the computer after completion.
3. Update or reinstall the application with problems
If it is a third-party application (such as Chrome, WeChat, Steam, etc.), it may be that the software version is too old or the installation file is corrupt.
- First try to uninstall the app, and then download the latest version from the official website to install it
- If installed from the Microsoft Store, you can find the app in the store → Click "..." → Select "Repair" or "Reset"
Special note: If you have recently upgraded your system version (for example, from Win10 to Win11), some older versions of applications may be incompatible. It is recommended to check whether the developers provide new version support.
4. Clean up temporary files and caches
Sometimes caching files can also cause the application to crash. You can try to clean up the system's temporary files and application cache.
Cleaning method:
- Press
Win Rto open the run window, enter%temp%and delete all temporary files (skip the ones that are being used) - In the same operation, enter
prefetchandC:\Windows\Tempto delete the contents.
In addition, you can also use the system's own "disk cleaning" tool for overall cleaning.
Basically these common ways of dealing with it. In most cases, a sequential search can solve the problem. If it is not complicated but is easy to ignore, it is often a matter of permissions or caching. Don’t rush to reinstall the system before starting.
The above is the detailed content of Windows 10 apps close immediately after opening. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Windows Security is blank or not showing options
Jul 07, 2025 am 02:40 AM
When the Windows Security Center is blank or the function is missing, you can follow the following steps to check: 1. Confirm whether the system version supports full functions, some functions of the Home Edition are limited, and the Professional Edition and above are more complete; 2. Restart the SecurityHealthService service to ensure that its startup type is set to automatic; 3. Check and uninstall third-party security software that may conflict; 4. Run the sfc/scannow and DISM commands to repair system files; 5. Try to reset or reinstall the Windows Security Center application, and contact Microsoft support if necessary.
Windows stuck on 'undoing changes made to your computer'
Jul 05, 2025 am 02:51 AM
The computer is stuck in the "Undo Changes made to the computer" interface, which is a common problem after the Windows update fails. It is usually caused by the stuck rollback process and cannot enter the system normally. 1. First of all, you should wait patiently for a long enough time, especially after restarting, it may take more than 30 minutes to complete the rollback, and observe the hard disk light to determine whether it is still running. 2. If there is no progress for a long time, you can force shut down and enter the recovery environment (WinRE) multiple times, and try to start repair or system restore. 3. After entering safe mode, you can uninstall the most recent update records through the control panel. 4. Use the command prompt to execute the bootrec command in the recovery environment to repair the boot file, or run sfc/scannow to check the system file. 5. The last method is to use the "Reset this computer" function
Proven Ways for Microsoft Teams Error 657rx in Windows 11/10
Jul 07, 2025 pm 12:25 PM
Encountering something went wrong 657rx can be frustrating when you log in to Microsoft Teams or Outlook. In this article on MiniTool, we will explore how to fix the Outlook/Microsoft Teams error 657rx so you can get your workflow back on track.Quick
The RPC server is unavailable Windows
Jul 06, 2025 am 12:07 AM
When encountering the "RPCserverisunavailable" problem, first confirm whether it is a local service exception or a network configuration problem. 1. Check and start the RPC service to ensure that its startup type is automatic. If it cannot be started, check the event log; 2. Check the network connection and firewall settings, test the firewall to turn off the firewall, check DNS resolution and network connectivity; 3. Run the sfc/scannow and DISM commands to repair the system files; 4. Check the group policy and domain controller status in the domain environment, and contact the IT department to assist in the processing. Gradually check it in sequence to locate and solve the problem.
the default gateway is not available Windows
Jul 08, 2025 am 02:21 AM
When you encounter the "DefaultGatewayisNotAvailable" prompt, it means that the computer cannot connect to the router or does not obtain the network address correctly. 1. First, restart the router and computer, wait for the router to fully start before trying to connect; 2. Check whether the IP address is set to automatically obtain, enter the network attribute to ensure that "Automatically obtain IP address" and "Automatically obtain DNS server address" are selected; 3. Run ipconfig/release and ipconfig/renew through the command prompt to release and re-acquire the IP address, and execute the netsh command to reset the network components if necessary; 4. Check the wireless network card driver, update or reinstall the driver to ensure that it works normally.
How to fix 'SYSTEM_SERVICE_EXCEPTION' stop code in Windows
Jul 09, 2025 am 02:56 AM
When encountering the "SYSTEM_SERVICE_EXCEPTION" blue screen error, you do not need to reinstall the system or replace the hardware immediately. You can follow the following steps to check: 1. Update or roll back hardware drivers such as graphics cards, especially recently updated drivers; 2. Uninstall third-party antivirus software or system tools, and use WindowsDefender or well-known brand products to replace them; 3. Run sfc/scannow and DISM commands as administrator to repair system files; 4. Check memory problems, restore the default frequency and re-plug and unplug the memory stick, and use Windows memory diagnostic tools to detect. In most cases, the driver and software problems can be solved first.
Windows 11 KB5062660 24H2 out with features, direct download links for offline installer (.msu)
Jul 23, 2025 am 09:43 AM
Windows 11 KB5062660 is now rolling out as an optional update for Windows 11 24H2 with a few new features, including Recall AI in Europe. This patch is available via Windows Update, but Microsoft has also posted direct download l
How to repair Windows 11 using command prompt
Jul 05, 2025 am 02:59 AM
How to use command prompt to repair Windows 11? 1. Enter the command prompt through the recovery environment: enter the recovery environment through USB boot or three consecutive interrupts, and then select Troubleshooting > Advanced Options > Command Prompt; 2. Use DISM to repair the system image: Run DISM/Online/Cleanup-Image/CheckHealth to check for corruption, DISM/Online/Cleanup-Image/ScanHealth scanning problem, DISM/Online/Cleanup-Image/RestoreHealth to repair the problem, and specify an external source if necessary; 3. Run SF
