Why do processes in Linux sleep?
Mar 20, 2024 pm 02:09 PM
Why do processes in Linux sleep?
In the Linux operating system, a process may become dormant due to a number of different reasons and conditions. When a process is in a dormant state, it means that the process is temporarily suspended and cannot continue execution until certain conditions are met before it can be awakened to continue execution. Next, we will introduce in detail several common situations when a process enters hibernation in Linux, and illustrate them with specific code examples.
-
Waiting for I/O to complete:
When the process initiates an I/O operation (such as reading files, network communication, etc.), the process will be In the sleep state, execution cannot continue until the I/O operation is completed. Here is a simple example code that demonstrates a process waiting for reading a file to complete:#include <stdio.h> int main() { FILE *file = fopen("example.txt", "rb"); if (file == NULL) { perror("Error opening file"); return 1; } char buffer[256]; fread(buffer, sizeof(char), 256, file); // Read file data and block the process until completion fclose(file); printf("File contents: %s ", buffer); return 0; } Waiting for signals:
The process may call functions such assigwait()orsigwaitinfo()Waiting for the arrival of a signal, at which point the process will go to sleep until the specific signal arrives. Here is a simple example code that shows a process waiting to receive a signal:#include <stdio.h> #include <signal.h> #include <unistd.h> void signal_handler(int signum) { printf("Signal received: %d ", signum); } int main() { struct sigaction sa; sa.sa_handler = signal_handler; sigaction(SIGINT, &sa, NULL); // Capture the SIGINT signal printf("Waiting for signal... "); sigset_t set; sigemptyset(&set); sigaddset(&set, SIGINT); int sig; sigwait(&set, &sig); // Wait for SIGINT signal printf("Signal received, exiting... "); return 0; }Waiting for locks or resources:
When a process accesses a shared resource, it may need to wait for permission to obtain a lock or access the resource. At this time, the process will Enter hibernation state. The following is a simple multi-threaded example code showing the process waiting to acquire the lock:#include <stdio.h> #include <pthread.h> pthread_mutex_t mutex = PTHREAD_MUTEX_INITIALIZER; int shared_data = 0; void *thread_function(void *arg) { pthread_mutex_lock(&mutex); // Wait for lock shared_data; printf("Thread: shared_data = %d ", shared_data); pthread_mutex_unlock(&mutex); return NULL; } int main() { pthread_t thread; pthread_create(&thread, NULL, thread_function, NULL); pthread_mutex_lock(&mutex); // Wait for lock shared_data; printf("Main: shared_data = %d ", shared_data); pthread_mutex_unlock(&mutex); pthread_join(thread, NULL); return 0; }
To sum up, a process in Linux may enter a dormant state due to waiting for I/O to complete, waiting for a signal to arrive, or waiting for a lock or resource. Understanding the reasons and circumstances under which a process enters hibernation is crucial for system programming and debugging. Code examples can provide a more intuitive understanding of the hibernation state of a process and its impact.
The above is the detailed content of Why do processes in Linux sleep?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
How does the cost of ownership differ between Linux and Windows?
Jun 09, 2025 am 12:17 AM
Linux's cost of ownership is usually lower than Windows. 1) Linux does not require license fees, saving a lot of costs, while Windows requires purchasing a license. 2) Linux has low hardware requirements and can extend the service life of the device. 3) The Linux community provides free support to reduce maintenance costs. 4) Linux is highly secure and reduces productivity losses. 5) The Linux learning curve is steep, but Windows is easier to use. The choice should be based on specific needs and budget.
How does the performance of I/O operations differ between Linux and Windows?
Jun 07, 2025 am 12:06 AM
LinuxoftenoutperformsWindowsinI/Operformanceduetoitscustomizablekernelandfilesystems,whileWindowsoffersmoreuniformperformanceacrosshardware.1)LinuxexcelswithcustomizableI/OschedulerslikeCFQandDeadline,enhancingperformanceinhigh-throughputapplications
How to install Linux alongside Windows (dual boot)?
Jun 18, 2025 am 12:19 AM
The key to installing dual systems in Linux and Windows is partitioning and boot settings. 1. Preparation includes backing up data and compressing existing partitions to make space; 2. Use Ventoy or Rufus to make Linux boot USB disk, recommend Ubuntu; 3. Select "Coexist with other systems" or manually partition during installation (/at least 20GB, /home remaining space, swap optional); 4. Check the installation of third-party drivers to avoid hardware problems; 5. If you do not enter the Grub boot menu after installation, you can use boot-repair to repair the boot or adjust the BIOS startup sequence. As long as the steps are clear and the operation is done properly, the whole process is not complicated.
How to enable the EPEL (Extra Packages for Enterprise Linux) repository?
Jun 17, 2025 am 09:15 AM
The key to enabling EPEL repository is to select the correct installation method according to the system version. First, confirm the system type and version, and use the command cat/etc/os-release to obtain information; second, enable EPEL through dnfinstallepel-release on CentOS/RockyLinux, and the 8 and 9 version commands are the same; third, you need to manually download the corresponding version of the .repo file and install it on RHEL; fourth, you can re-import the GPG key when encountering problems. Note that the old version may not be supported, and you can also consider enabling epel-next to obtain the test package. After completing the above steps, use dnfrepolist to verify that the EPEL repository is successfully added.
How does Linux perform compared to Windows for web server workloads?
Jun 08, 2025 am 12:18 AM
Linux usually performs better in web server performance, mainly due to its advantages in kernel optimization, resource management and open source ecosystem. 1) After years of optimization of the Linux kernel, mechanisms such as epoll and kqueue make it more efficient in handling high concurrent requests. 2) Linux provides fine-grained resource management tools such as cgroups. 3) The open source community continuously optimizes Linux performance, and many high-performance web servers such as Nginx are developed on Linux. By contrast, Windows performs well when handling ASP.NET applications and provides better development tools and commercial support.
How to choose a Linux distro for a beginner?
Jun 19, 2025 am 12:09 AM
Newbie users should first clarify their usage requirements when choosing a Linux distribution. 1. Choose Ubuntu or LinuxMint for daily use; programming and development are suitable for Manjaro or Fedora; use Lubuntu and other lightweight systems for old devices; recommend CentOSStream or Debian to learn the underlying principles. 2. Stability is preferred for UbuntuLTS or Debian; you can choose Arch or Manjaro to pursue new features. 3. In terms of community support, Ubuntu and LinuxMint are rich in resources, and Arch documents are technically oriented. 4. In terms of installation difficulty, Ubuntu and LinuxMint are relatively simple, and Arch is suitable for those with basic needs. It is recommended to try it first and then decide.
How to add a new disk to Linux
Jun 27, 2025 am 12:15 AM
The steps to add a new hard disk to the Linux system are as follows: 1. Confirm that the hard disk is recognized and use lsblk or fdisk-l to check; 2. Use fdisk or parted partitions, such as fdisk/dev/sdb and create and save; 3. Format the partition to a file system, such as mkfs.ext4/dev/sdb1; 4. Use the mount command for temporary mounts, such as mount/dev/sdb1/mnt/data; 5. Modify /etc/fstab to achieve automatic mount on the computer, and test the mount first to ensure correctness. Be sure to confirm data security before operation to avoid hardware connection problems.
Where are system logs located in Linux?
Jun 24, 2025 am 12:15 AM
Logs in Linux systems are usually stored in the /var/log directory, which contains a variety of key log files, such as syslog or messages (record system logs), auth.log (record authentication events), kern.log (record kernel messages), dpkg.log or yum.log (record package operations), boot.log (record startup information); log content can be viewed through cat, tail-f or journalctl commands; application logs are often located in subdirectories under /var/log, such as Apache's apache2 or httpd directory, MySQL log files, etc.; at the same time, it is necessary to note that log permissions usually require s
