Is your Windows 10 computer stuck on "Processing update 100% complete Do not shut down the computer"? This is a common problem that occurs when Windows attempts to install updates while shutting down or restarting.

The first thing you can try in this case is to force restart your PC. However, if this doesn't help, you can continue to try the following potential solutions.

Scenario 1: When You Can Access Windows

Before you follow the method below, make sure to wait a few hours and see if it works or restart your PC:

Method 1: Run the Windows Update Troubleshooter

Step 1: Right-click Start and select Run to open the Run command window.

Step 2: In the Run command search field, type control.exe to open the Control Panel window

Step 3 : In the Control Panel window, go to View by Field and select Large Icons from the drop-down list.

Click Troubleshooter in the list.

Step 4: Next, select View All from the left side of the pane.

Step 5: In the All Categories window, select Windows Update from the list.

#Step 6: It will open the Windows Update Troubleshooter.

Here, click Advanced at the bottom.

Step 7: Now, check the box next to Apply repairs automatically.

Click Next.

Step 8: The troubleshooter starts detecting any issues.

If any issues are found, it will provide some suggestions that you can try to fix the errors.

When finished, exit the Troubleshooter and Control Panel. Restart your PC for the changes to take effect. You should no longer see this error.

Method 2: Rename the SoftwareDistribution folder

Step 1: Press the Win R keys simultaneously on the keyboard to open the Run command.

Step 2: In the search field, type cmd and press the Ctrl Shift Enter shortcut key on your keyboard to open an elevated command prompt.

Step 3: In the Command Prompt (Admin) window, run the following commands one by one, pressing Enter after each command to stop the Windows Update service:

Network stop wuauserv
Network stop cryptSvc
Network stop bit
Network stop msiserver

Step 4: Next, type the following commands one by one to rename the SoftwareDistribution folder and press Enter after each command:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old任 C:\Windows\System32\catroot2 catroot2.old

Step 5: Now, execute the following one by one commands and press Enter after each command to start Windows Update again:

凈啟動 wuauserv網絡啟動 cryptSvc網絡起始位網絡啟動 msiserver

Once the process is over, restart your PC and you should not encounter updates being processed 100% complete and no longer shutting down the computer The problem.

Method 3: Reset Windows Update Components

Step 1: Go to Start, right-click on it and select Run.

Step 2: In the Run Command window that opens, type cmd in the search box and then press the Ctrl Shift Enter key simultaneously to launch a command prompt with administrator privileges.

Step 3: In an elevated command prompt window, execute the following commands one by one and press Enter after each command to stop Windows Update related services on the system:

凈停止位凈停止 wuauserv凈停止 appidsvc凈停止 cryptsvc

Step 4 Step: Now, execute the following command to delete the qmgr*.dat file:

Del "%ALLUSERSPROFILE%\Application Data\Microsoft\Network\Downloader\qmgr*.dat"

Step 5: Next, run the following command and press Enter:

cd /d %windir%\system32

Step 5: Enter the following commands one by one Copy and paste and press Enter after each command to register BITS files and Windows update files:

regsvr32.exe atl.dllregsvr32.exe urlmon.dllregsvr32.exe mshtml.dllregsvr32.exe shdocvw.dllregsvr32.exe browseui.dllregsvr32.exe jscript.dllregsvr32.exe vbscript.dllregsvr32.exe scrrun.dllregsvr32.exe msxml.dllregsvr32.exe msxml3.dllregsvr32.exe msxml6.dllregsvr32.exe actxprxy.dllregsvr32.exe softpub.dllregsvr32.exe wintrust.dllregsvr32.exe dssenh.dllregsvr32.exe rsaenh.dllregsvr32.exe gpkcsp.dllregsvr32.exe sccbase.dllregsvr32.exe slbcsp.dllregsvr32.exe cryptdlg.dllregsvr32.exe oleaut32.dllregsvr32.exe ole32.dllregsvr32.exe shell32.dllregsvr32.exe initpki.dllregsvr32.exe wuapi.dllregsvr32.exe wuaueng.dllregsvr32.exe wuaueng1.dllregsvr32.exe wucltui.dllregsvr32.exe wups.dllregsvr32.exe wups2.dllregsvr32.exe wuweb.dllregsvr32.exe qmgr.dllregsvr32.exe qmgrprxy.dllregsvr32.exe wucltux.dllregsvr32.exe muweb.dllregsvr32.exe wuwebv.dll

Step 6: Now, type the following commands in the command prompt and press Enter:

netsh winsock 重置

Step 7: Next, copy the following command line, paste it in Command Prompt (Admin) and press Enter:

sc.exe sdset 位 D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

Step 8: Finally, run the following commands one by one and in Press Enter key after each command to restart Windows Update service:

網絡起始位凈啟動 wuauserv網絡啟動 appidsvc網絡啟動 cryptsvc

Step 9: Now, click on the following link to download and install Windows Update Agent from the official Microsoft page:

Windows Update Agent

From here, you can install the Windows Update Agent automatically or manually.

Once completed, restart your PC and see if the "Processing update 100% complete Do not shut down your computer" is fixed.

Now, close the command prompt window and restart your computer to check if this helps resolve the issue.

Method 4: Uninstall the update causing the problem

Step 1: Simultaneously press the Win X keys on your keyboard and select Run to launch the Run command window .

Step 2: In the search box, type appwiz.cpl and press OK to open the Programs and Features window in Control Panel.

Step 3: In the Control Panel > Programs and Features window, click View installed updates on the left.

# Step 4: Now, on the right side of the window, under the Uninstall updates section, select the update from the list that is causing the problem, right-click on it and select uninstall.

Now, wait for the update to be installed. After uninstalling, restart your PC and you should no longer see the error.

Method 5: Perform a Clean Boot

Step 1: Right-click on the Start Menu and select Run.

Step 2: This will open the Run Command box.

Here, type msconfig in the search field and press Enter to open the System Configuration window.

Step 3: In the System Configuration window, under the General tab, go to Selective Startup" section and make sure the box next to "Load startup items" is unchecked.

Step 4: Now, select the

Services tab and check next to the Hide all Microsoft services option frame.

Step 5: Next, press the Disable All button at the bottom to disable all remaining services

.

Press

Apply and then OKSave changes and exit.

Now, restart your computer and check if the error disappears.

*Note -If this method helps solve the problem, the problem is caused by third-party software. In this case, you need to identify the specific software that is causing the problem so that you can uninstall it to avoid future conflicts. To do this, you need to enable a set of services from the list of services under the Services tab of the System Configuration window and then restart your PC. Continue repeating this process until you identify the set of services that may be causing the problem. Once you know this, check each service in this set to identify the specific software.

Remember to revert to original settings i.e. check Loading Startup Items to restart your PC

Method 6: Perform a System Restore

When none of the above methods work , you can try running System Restore to restore your PC to a previous working state. Now, wait for the system restore process to complete. This will take a while, so please be patient and wait for it to play out. Once it's back to its previous working state, you should no longer see the error.

Scenario 2: If you cannot access Windows

However, if you cannot start Windows, you can first try to disconnect any external devices that may be connected via USB, such as pen drives, keyboards, etc. . After removing any external devices from your system, try updating your Windows. However, if this doesn't help, continue with the solutions below.

Method One: Uninstall Problem Updates in Safe Mode

Steps to Enter Safe Mode When Unable to Boot (Optional)

Note: – If you cannot boot the system, please Try using the following steps to get to the automatic repair screen.

1.

Close the computer.

2. Then, use the power button

to start the computer once.

Once something appears on the screen (usually the laptop manufacturer's logo), simply hold down the power button for 5 seconds to force shut down the device.

3. Continue repeating this process (force shutdown and restart)

2 - 3 times until you see Automatic repair screen.

4. Then, click on “

Advanced Options” in the next screen.

#5. After that, you need to click on “

Troubleshooting”.

6. Then, click "

Advanced Options".

7 – Click

Start Settings.

8 – 單擊重新啟動

9 – 按4或鍵盤選擇啟用安全模式。

第 11 步：進入安全模式后，請按照以下過程卸載問題更新：

第 12 步：同時按下鍵盤上的Win + X鍵，然后選擇運行以啟動運行命令窗口。

第 13 步：在搜索框中，鍵入appwiz.cpl并按 OK 打開控制面板中的程序和功能窗口。

第 14 步：在“控制面板”>“程序和功能”窗口中，單擊左側的“查看已安裝的更新”。

第 15 步：現在，在窗口右側的卸載更新部分下，從導致問題的列表中選擇更新，右鍵單擊它并選擇卸載。

現在，等待安裝更新。卸載后，重新啟動您的 PC，您應該不會再看到該錯誤。

現在，重新啟動您的 PC，您應該不會再次看到該錯誤。

方法2：運行自動/啟動修復

第 1 步：按照此類別中上一個方法（方法 1）中的第 1 步到第 6 步，進入“選擇一個選項”屏幕?，F(xiàn)在，按照以下路徑進入“高級選項”屏幕：

選擇一個選項屏幕 > 疑難解答 > 高級選項

第 2 步：接下來，在“高級選項”屏幕中，選擇“啟動修復” 。

第 3 步：現在，等到 Windows 自動/啟動修復過程完成。

完成后，重新啟動計算機，100% 完成正在處理更新不要關閉計算機問題應該得到解決。

方法三：運行 MemTest86+

在繼續之前，請確保您有另一臺 PC 準備好下載 MemTest86+，然后將其刻錄到外部驅動器 (CD/DVD/USB)?，F(xiàn)在，按照步驟運行 MemTest86+：

第 1 步：將閃存驅動器連接到您的機器，然后單擊以下鏈接下載并安裝 MemTest86：

下載并安裝 MemTest86

第 2 步：現在，單擊以打開 Zip 文件。

在這里，將文件解壓縮到您的首選位置。

我們將文件提取到桌面。

第 3 步：解壓到該位置后，雙擊該文件運行 MemTest86+ USB Installer。

第 4 步：在 Memtest86+ USB 安裝程序設置窗口中，轉到選擇您的 USB 閃存驅動器部分并從下拉列表中選擇連接的 USB 驅動器以格式化 USB 驅動器。

單擊創建以完成該過程。

上述過程結束后，將 USB 驅動器連接到出現錯誤的 PC，重新啟動 PC 并檢查 USB 驅動器是否設置為從 USB 驅動器啟動。

Memtest86 現在將開始查找系統內存的任何問題。

如果所有測試都成功完成，則表示系統內存工作正常。但是，如果某些測試失敗，則由于內存損壞而發生“發生磁盤讀取錯誤”。而且，在這種情況下，您需要為系統內存中的任何壞扇區更換 RAM，并修復“?100% 完成更新工作不要關閉計算機”問題。

方法 4：在安全模式下重置 Windows 更新組件

再次啟動進入安全模式（如方法 2：運行自動/啟動修復），然后按照方法 3：從情況 1 重置 Windows 更新組件。這將有助于在安全模式下重置 Windows 更新組件，并應修復“工作更新 100% 完成不要關閉計算機”問題。

方法 5：運行 DISM

步驟 1：首先，按照方法 1：在安全模式下卸載問題更新中所示的步驟 1 至 6，在安全模式下打開命令提示符。

第 2 步：現在，在命令提示符窗口中，一一鍵入以下命令，并在每個命令后按 Enter：

Dism /在線 /Cleanup-Image /CheckHealthDism /在線 /Cleanup-Image /ScanHealthDism /在線 /Cleanup-Image /RestoreHealth

第3步：現在，等到該過程結束，因?yàn)檫@需要幾分鐘。

完成后，退出命令提示符并重新啟動 PC。您不應再次遇到該錯誤。

*注意 -如果上述命令無法解決問題，請依次運行以下命令并在每個命令后按 Enter：

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windowsDism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

將突出顯示的部分（修復源驅動器）替換為修復源驅動器的位置，即 Windows 安裝或恢復光盤。

關閉命令提示符并重新啟動系統以檢查問題是否已解決。

方法 6：手動從 Microsoft 更新目錄下載更新

步驟 1：您可以按照方法 1：在安全模式下卸載問題更新中所示的步驟 1 至 6 以在安全模式下打開命令提示符。

Step 2: In the command prompt window, run the following command and press Enter to check your system type (32-bit/64-bit):

System Information

Step 3 Step: Now that you know your system type, right-click Start and select Settings.

Step 4: In the Settings app, click Update & Security.

Step 5: In the next window, go to the right and click View update history.

Step 6: Next, under the View update history page, note the update number that failed to install (for example, KB3006137).

Step 7: Now, visit the Microsoft Update Catalog page to download the specific update that failed to install.

Step 8: On the right side, enter the update number and press the search button next to it.

Step 9: In the search results page, click the Download button next to the correct update (based on your system type).

Step 10: It will open a pop-up window.

Here, click on the link to start the update download process.

Step 11: Open the downloaded file and follow the on-screen instructions to complete the update installation.

But if none of the above methods work, the only way out is to perform a system restore to restore your PC to its previous working state. After this, you should no longer see update errors.

The above is the detailed content of Stuck on 'Don't shut down your computer until the update is 100% complete'? This is the solution. For more information, please follow other related articles on the PHP Chinese website!