?
Dieses Dokument verwendet PHP-Handbuch für chinesische Websites Freigeben
在頭文件<string.h>中定義 | ||
---|---|---|
(1) | ||
char * strcat(char * dest,const char * src); | (直到C99) | |
char * strcat(char * restrict dest,const char * restrict src); | (自C99以來) | |
errno_t strcat_s(char * restrict dest,rsize_t destsz,const char * restrict src); | (2) | (自C11以來) |
1)將由src指向的空終止字節串的副本追加到由dest指向的以空字節終止的字節串的末尾。 字符src [0]替換dest結尾處的空終止符。 得到的字節字符串以空字符結尾。
如果目標數組的大小不足以滿足src和dest的內容以及終止空字符,則行為未定義。 如果字符串重疊,則行為未定義。 如果dest或src不是指向以空字符結尾的字節字符串的指針,則行為未定義。
2)與(1)相同,只不過它可能會將未指定值的目標數組的剩余部分(從寫入到destsz的最后一個字符中)截?cái)?,并且在運行時檢測到以下錯誤并調用當前安裝的約束處理函數:
src
或者dest
是空指針
destsz
是零或大于 RSIZE_MAX
在第一個destsz
字節中沒有空終止符dest
將會發生截?cái)啵ㄔ谀┪驳目捎每臻gdest
不適合每個字符,包括空終止符src
)
源和目標字符串之間會發生重疊
如果dest <strlen(dest)+ strlen(src)+1 <= destsz所指向的字符數組的大小,則行為未定義; 換句話說,destsz的錯誤值不會暴露即將發生的緩沖區溢出。 作為所有邊界檢查的函數,只有當__STDC_LIB_EXT1__由實現定義時,并且在包含string.h之前用戶將__STDC_WANT_LIB_EXT1__定義為整數常量1時,strcat_s才能保證可用。
dest | - | 指向要附加到的以空字符結尾的字節字符串 |
---|---|---|
src | - | 指向要從中復制的以null結尾的字節字符串 |
destsz | - | 最大寫入字符數,通常是目標緩沖區的大小 |
1)返回 dest
副本
2)在成功時返回零,錯誤時返回非零值。 另外,如果發生錯誤,則將零寫入dest [0](除非dest是空指針或destsz為零或大于RMAX_SIZE)。
為了提高效率,strcat_s允許從最后寫入destsz的字符中截?cái)嗄繕?biāo)數組:它可以復制多字節塊,然后檢查空字節。
函數strcat_s與BSD函數strlcat相似,除以下情況:
strlcat
截?cái)嘣醋址赃m合目標
strlcat
不執行所有的運行時檢查是strcat_s
不會
strlcat
通過將目標設置為空字符串或在調用失敗時調用處理程序不會使失敗變得明顯。
雖然strcat_s由于潛在的安全風險而禁止截?cái)啵梢允褂胋ounds-checked strncat_s來截?cái)嘧址?/p>
#define __STDC_WANT_LIB_EXT1__ 1#include <string.h> #include <stdio.h>#include <stdlib.h> int main(void) { char str[50] = "Hello "; char str2[50] = "World!"; strcat(str, str2); strcat(str, " ..."); strcat(str, " Goodbye World!"); puts(str); #ifdef __STDC_LIB_EXT1__ set_constraint_handler_s(ignore_handler_s); int r = strcat_s(str, sizeof str, " ... "); printf("str = \"%s\", r = %d\n", str, r); r = strcat_s(str, sizeof str, " and this is too much"); printf("str = \"%s\", r = %d\n", str, r);#endif}
可能的輸出:
Hello World! ... Goodbye World!str = "Hello World! ... Goodbye World! ... ", r = 0str = "", r = 22
C11標準(ISO / IEC 9899:2011):
7.24.3.1 strcat函數(p:364)
K.3.7.2.1 strcat_s函數(p:617-618)
C99標準(ISO / IEC 9899:1999):
7.21.3.1 strcat函數(p:327)
C89 / C90標準(ISO / IEC 9899:1990):
4.11.3.1 strcat函數
strncatstrncat_s(C11) | 串聯一定數量的兩個字符串(函數) |
---|---|
strcpystrcpy_s(C11) | 將一個字符串復制到另一個(函數) |
| strcat的C ++文檔 |
本文檔系騰訊云云+社區成員共同維護,如有問題請聯系 yunjia_community@tencent.com
在頭文件<wctype.h>中定義 | ||
---|---|---|
int iswdigit(wint_t ch); | (自C95以來) |
檢查給定的寬字符是否對應(如果縮小)十個十進制數字字符0123456789中的一個。
CH | - | 寬字符 |
---|
如果寬字符是數字字符,則為非零值,否則為零。
iswdigit
與iswxdigit
是唯一不受當前安裝的C語言環境影響的標準寬字符分類函數。
一些語言環境提供了檢測非ASCII數字的附加字符類。
#include <stdio.h>#include <wctype.h>#include <wchar.h>#include <locale.h> void test(wchar_t a3, wchar_t u3, wchar_t j3){ printf(" '%lc' '%lc' '%lc'\n", a3, u3, j3); printf("iswdigit %d %d %d\n", !!iswdigit(a3), !!iswdigit(u3), !!iswdigit(j3)); printf("jdigit: %d %d %d\n", !!iswctype(a3, wctype("jdigit")), !!iswctype(u3, wctype("jdigit")), !!iswctype(j3, wctype("jdigit")));} int main(void){ wchar_t a3 = L'3'; // the ASCII digit 3 wchar_t u3 = L'三'; // the CJK numeral 3 wchar_t j3 = L'3'; // the fullwidth digit 3 setlocale(LC_ALL, "en_US.utf8"); puts("In American locale:"); test(a3, u3, j3); setlocale(LC_ALL, "ja_JP.utf8"); puts("\nIn Japanese locale:"); test(a3, u3, j3);}
輸出:
In American locale: '3' '三' '3'iswdigit 1 0 0jdigit: 0 0 0 In Japanese locale: '3' '三' '3'iswdigit 1 0 0jdigit: 0 0 1
C11標準(ISO / IEC 9899:2011):
7.30.2.1.5 iswdigit函數(p:449)
C99標準(ISO / IEC 9899:1999):
7.25.2.1.5 iswdigit函數(p:395)
isdigit | 檢查一個字符是否是一個數字(功能) |
---|
| 用于iswdigit的C ++文檔 |
ASCII 值 (十六進制) | 字符 | iscntrl iswcntrl. | isprint iswprint. | isspace iswspace. | isblank iswblank. | isgraph iswgraph. | ispunct iswpunct. | isalnum iswalnum. | isalpha iswalpha. | isupper iswupper. | islower iswlower. | isdigit iswdigit. | isxdigit iswxdigit. | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0 - 8 | 0x00-0x08 | 控制碼 (NUL, etc.) | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
9 | 0x09 | tab (\t) | ≠0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
10 - 13 | 0x0A-0x0D | 空格 (\n,\v,\f,\r) | ≠0 | 0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
14 - 31 | 0x0E-0x1F | 控制碼 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
32 | 0x20 | space | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
33 - 47 | 0x21-0x2F | !"#$%&'()*+,-./ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
48 - 57 | 0x30-0x39 | 0123456789 | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | 0 | 0 | 0 | ≠0 | ≠0 |
58 - 64 | 0x3a-0x40 | :;<=>?@ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
65 - 70 | 0x41-0x46 | ABCDEF | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | ≠0 |
71 - 90 | 0x47-0x5A | GHIJKLMNOPQRSTUVWXYZ | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | ≠0 | 0 | 0 | 0 |
91 - 96 | 0x5B-0x60 | []^_` | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | | ||||||||||||
97 -102 | 0x61-0x66 | abcdef | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | 0 | ≠0 | 0 | ≠0 |
103-122 | 0x67-0x7A | ghijklmnopqrstuvwxyz | 0 | ≠0 | 0 | 0 | ≠0 | 0 | ≠0 | ≠0 | 0 | ≠0 | 0 | 0 |
123-126 | 0x7B-0x7E | {|}~ | 0 | ≠0 | 0 | 0 | ≠0 | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 |
127 | 0x7F | 退格 (DEL) | ≠0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |