Session類允許您在瀏覽您的網站時維護用戶的“狀態”并跟蹤他們的活動。

CodeIgniter帶有幾個會話存儲驅動程序：

• 文件（默認;基于文件系統）

• 數據庫

• 重復

• memcached的

另外，您可以基于其他類型的存儲創建自己的自定義會話驅動程序，同時仍然利用Session類的功能。

• 使用會話類

• 關于并發性的說明

• 初始化會話

• 會話如何工作？

- [What is Session Data?](about:blank#what-is-session-data)- [Retrieving Session Data](about:blank#retrieving-session-data)- [Adding Session Data](about:blank#adding-session-data)- [Removing Session Data](about:blank#removing-session-data)- [Flashdata](about:blank#flashdata)- [Tempdata](about:blank#tempdata)- [Destroying a Session](about:blank#destroying-a-session)- [Accessing session metadata](about:blank#accessing-session-metadata)- [Session Preferences](about:blank#session-preferences)-  [Session Drivers](about:blank#session-drivers)    -  [Files Driver](about:blank#files-driver)        - [Bonus Tip](about:blank#bonus-tip)

    - [Database Driver](about:blank#database-driver)    - [Redis Driver](about:blank#redis-driver)    -  [Memcached Driver](about:blank#memcached-driver)        - [Bonus Tip](about:blank#id1)

    - [Custom Drivers](about:blank#custom-drivers)

• 類參考

使用會話類

初始化會話

會話通常會在每次頁面加載時全局運行，因此Session類應該在控制器構造函數中初始化，或者可以由系統自動加載。在大多數情況下，會話類將在后臺無人值守運行，因此只需初始化該類就可以在必要時讀取，創建和更新會話。

要在控制器構造函數中手動初始化Session類，請使用以下$this->load->library()方法：

$this->load->library('session');

加載后，會話庫對象將可用：

$this->session

重要

由于Loader類是由CodeIgniter的基本控制器實例化的，因此請務必parent::__construct()在嘗試從控制器構造函數中加載庫之前進行調用。

會話如何工作？

加載頁面時，會話類將檢查用戶瀏覽器是否發送有效的會話cookie。如果會話Cookie并不不存在（或者如果它不匹配一個存儲在服務器上或已過期）的新會話將被創建和保存。

如果有效的會話存在，其信息將被更新。每次更新時，如果配置為這樣，會話ID可能會重新生成。

了解一旦初始化后，Session類自動運行對你來說很重要。沒有什么你需要做的，導致上述行為發生。正如您將在下面看到的，您可以使用會話數據，但讀取，寫入和更新會話的過程是自動的。

注意

在CLI下，會話庫將自動停止，因為這是一個完全基于HTTP協議的概念。

關于并發性的說明

除非你正在開發一個AJAX用量很大的網站，否則你可以跳過這一節。但是，如果你是，而且如果你遇到性能問題，那么這個筆記就是你正在尋找的東西。

以前版本的CodeIgniter中的會話沒有實現鎖定，這意味著使用同一會話的兩個HTTP請求可以同時運行。要使用更合適的技術術語 - 請求是非阻塞的。

但是，會話上下文中的非阻塞請求也意味著不安全，因為在一個請求中修改會話數據（或會話ID再生）可能會干擾第二個并發請求的執行。這個細節是許多問題的根源，也是CodeIgniter 3.0有一個完全重寫的會話庫的主要原因。

我們?yōu)槭裁匆嬖V你這個？因為很可能在找到性能問題的原因之后，可能會得出結論：鎖定是問題，因此需要研究如何刪除鎖定...

不要那樣做！刪除鎖將是錯誤的，它會導致更多的問題！

鎖定不是問題，它是一個解決方案。你的問題是，你仍然打開會議，而你已經處理它，因此不再需要它。所以，你需要的是在你不再需要之后關閉當前請求的會話。

長話短說 - session_write_close()一旦你不再需要任何與會話變量有關的事情，就會致電。

什么是會話數據？

會話數據只是一個與特定會話ID（cookie）關聯的數組。

如果您以前在PHP中使用會話，則應該熟悉PHP的$ _SESSION超全局（如果沒有，請閱讀該鏈接上的內容）。

CodeIgniter通過相同的方式訪問會話數據，因為它使用PHP提供的會話處理器機制。使用會話數據與操作（讀取，設置和取消設置值）$_SESSION數組一樣簡單。

另外，CodeIgniter還提供了2種特殊類型的會話數據，這些數據將在下面進一步解釋：flashdata和tempdata。

注意

在以前的版本中，CodeIgniter中的常規會話數據被稱為'userdata'。請記住，如果該術語在手冊的其他地方使用。它的大部分內容都是為了解釋自定義的'userdata'方法是如何工作的。

檢索會話數據

來自會話數組的任何信息都可以通過$_SESSION超全局獲得：

$_SESSION['item']

或者通過魔術獲得者：

$this->session->item

為了向后兼容，通過以下userdata()方法：

$this->session->userdata('item');

其中item是與您希望獲取的物品相對應的數組鍵。例如，要將以前存儲的'名稱'項目分配給$name變量，您將執行以下操作：

$name = $_SESSION['name'];// or:$name = $this->session->name// or:$name = $this->session->userdata('name');

注意

userdata()如果您嘗試訪問的項目不存在，則該方法返回NULL。

如果你想檢索所有現有的用戶數據，你可以簡單地省略項目鍵（魔術獲得者只適用于屬性）：

$_SESSION// or:$this->session->userdata();

添加會話數據

比方說，一個特定的用戶登錄到您的網站。一旦通過身份驗證，您就可以將他們的用戶名和電子郵件地址添加到會話中，使您可以在全球范圍內使用這些數據，而無需在需要時運行數據庫查詢。

$_SESSION與任何其他變量一樣，您可以簡單地將數據分配給數組?；蜃鳛橐粋€屬性$this->session。

或者，也可以使用將其分配為“用戶數據”的舊方法。但是，將包含新數據的數組傳遞給set_userdata()方法：

$this->session->set_userdata($array);

$array包含新數據的關聯數組在哪里？這是一個例子：

$newdata = array(        'username'  => 'johndoe',        'email'     => '[email protected]',        'logged_in' => TRUE);$this->session->set_userdata($newdata);

如果您想一次添加userdata一個值，set_userdata()還支持以下語法：

$this->session->set_userdata('some_name', 'some_value');

如果您想驗證會話值是否存在，只需檢查isset()：

// returns FALSE if the 'some_name' item doesn't exist or is NULL,// TRUE otherwise:isset($_SESSION['some_name'])

或者你可以打電話給has_userdata()：

$this->session->has_userdata('some_name');

刪除會話數據

正如其他任何變量一樣，$_SESSION可以通過unset()以下方式取消設置值：

unset($_SESSION['some_name']);// or multiple values:unset(
        $_SESSION['some_name'],
        $_SESSION['another_name']);

此外，正如set_userdata()可以用來向會話添加信息一樣，unset_userdata()可以通過傳遞會話密鑰來刪除它。例如，如果您想從會話數據數組中刪除'some_name'：

$this->session->unset_userdata('some_name');

該方法還接受一組項目鍵以取消設置：

$array_items = array('username', 'email');$this->session->unset_userdata($array_items);

注意

在以前的版本中，該unset_userdata()方法用于接受一個關聯數組key => 'dummy value'對。這不再支持。

Flashdata

CodeIgniter支持“flashdata”或會話數據，它們只會在下一個請求中使用，然后自動清除。

這可能非常有用，特別是對于一次性信息，錯誤或狀態消息（例如：“記錄2已刪除”）。

應該注意的是，flashdata變量是常規會話變量，只有在'__ci_vars'鍵下以特定方式標記（請不要觸摸那個，你已被警告過）。

將現有項目標記為“flashdata”：

$this->session->mark_as_flash('item');

如果您想將多個項目標記為flashdata，只需將密鑰作為數組傳遞即可：

$this->session->mark_as_flash(array('item', 'item2'));

添加flashdata：

$_SESSION['item'] = 'value';$this->session->mark_as_flash('item');

或者，使用該set_flashdata()方法：

$this->session->set_flashdata('item', 'value');

You can also pass an array to set_flashdata(), in the same manner as set_userdata().

讀取flashdata變量與讀取常規會話數據的過程相同$_SESSION：

$_SESSION['item']

重要

該userdata()方法不會返回flashdata項目。

但是，如果您想確定您正在閱讀“flashdata”（而不是其他類型），則還可以使用以下flashdata()方法：

$this->session->flashdata('item');

或者為了獲得一個包含所有flash數據的數組，只需省略關鍵參數：

$this->session->flashdata();

注意

flashdata()如果無法找到該項目，該方法返回NULL。

如果您發現需要通過附加請求保留flashdata變量，則可以使用該keep_flashdata()方法執行此操作。您可以傳遞單個項目或一組flash數據項以保留。

$this->session->keep_flashdata('item');$this->session->keep_flashdata(array('item1', 'item2', 'item3'));

Tempdata

CodeIgniter also supports “tempdata”, or session data with a specific expiration time. After the value expires, or the session expires or is deleted, the value is automatically removed.

Similarly to flashdata, tempdata variables are regular session vars that are marked in a specific way under the ‘__ci_vars’ key (again, don’t touch that one).

To mark an existing item as “tempdata”, simply pass its key and expiry time (in seconds!) to the mark_as_temp() method:

// 'item' will be erased after 300 seconds$this->session->mark_as_temp('item', 300);

You can mark multiple items as tempdata in two ways, depending on whether you want them all to have the same expiry time or not:

// Both 'item' and 'item2' will expire after 300 seconds$this->session->mark_as_temp(array('item', 'item2'), 300);// 'item' will be erased after 300 seconds, while 'item2'// will do so after only 240 seconds$this->session->mark_as_temp(array(        'item'  => 300,        'item2' => 240));

To add tempdata:

$_SESSION['item'] = 'value';$this->session->mark_as_temp('item', 300); // Expire in 5 minutes

Or alternatively, using the set_tempdata() method:

$this->session->set_tempdata('item', 'value', 300);

You can also pass an array to set_tempdata():

$tempdata = array('newuser' => TRUE, 'message' => 'Thanks for joining!');$this->session->set_tempdata($tempdata, NULL, $expire);

Note

If the expiration is omitted or set to 0, the default time-to-live value of 300 seconds (or 5 minutes) will be used.

To read a tempdata variable, again you can just access it through the $_SESSION superglobal array:

$_SESSION['item']

Important

The userdata() method will NOT return tempdata items.

Or if you want to be sure that you’re reading “tempdata” (and not any other kind), you can also use the tempdata() method:

$this->session->tempdata('item');

And of course, if you want to retrieve all existing tempdata:

$this->session->tempdata();

Note

The tempdata() method returns NULL if the item cannot be found.

If you need to remove a tempdata value before it expires, you can directly unset it from the $_SESSION array:

unset($_SESSION['item']);

However, this won’t remove the marker that makes this specific item to be tempdata (it will be invalidated on the next HTTP request), so if you intend to reuse that same key in the same request, you’d want to use unset_tempdata():

$this->session->unset_tempdata('item');

Destroying a Session

To clear the current session (for example, during a logout), you may simply use either PHP’s session_destroy() function, or the sess_destroy() method. Both will work in exactly the same way:

session_destroy();// or$this->session->sess_destroy();

Note

This must be the last session-related operation that you do during the same request. All session data (including flashdata and tempdata) will be destroyed permanently and functions will be unusable during the same request after you destroy the session.

Accessing session metadata

In previous CodeIgniter versions, the session data array included 4 items by default: ‘session_id’, ‘ip_address’, ‘user_agent’, ‘last_activity’.

This was due to the specifics of how sessions worked, but is now no longer necessary with our new implementation. However, it may happen that your application relied on these values, so here are alternative methods of accessing them:

• session_id: session_id()

• ip_address: $_SERVER['REMOTE_ADDR']

• user_agent: $this->input->user_agent() (unused by sessions)

• last_activity: Depends on the storage, no straightforward way. Sorry!

Session Preferences

CodeIgniter will usually make everything work out of the box. However, Sessions are a very sensitive component of any application, so some careful configuration must be done. Please take your time to consider all of the options and their effects.

You’ll find the following Session related preferences in your application/config/config.php file:

Note

As a last resort, the Session library will try to fetch PHP’s session related INI settings, as well as legacy CI settings such as ‘sess_expire_on_close’ when any of the above is not configured. However, you should never rely on this behavior as it can cause unexpected results or be changed in the future. Please configure everything properly.

In addition to the values above, the cookie and native drivers apply the following configuration values shared by the Input and Security classes:

Note

The ‘cookie_httponly’ setting doesn’t have an effect on sessions. Instead the HttpOnly parameter is always enabled, for security reasons. Additionally, the ‘cookie_prefix’ setting is completely ignored.

Session Drivers

As already mentioned, the Session library comes with 4 drivers, or storage engines, that you can use:

• files

• database

• redis

• memcached

By default, the Files Driver will be used when a session is initialized, because it is the most safe choice and is expected to work everywhere (virtually every environment has a file system).

However, any other driver may be selected via the $config['sess_driver'] line in your application/config/config.php file, if you chose to do so. Have it in mind though, every driver has different caveats, so be sure to get yourself familiar with them (below) before you make that choice.

In addition, you may also create and use Custom Drivers, if the ones provided by default don’t satisfy your use case.

Note

In previous CodeIgniter versions, a different, “cookie driver” was the only option and we have received negative feedback on not providing that option. While we do listen to feedback from the community, we want to warn you that it was dropped because it is unsafe and we advise you NOT to try to replicate it via a custom driver.

Files Driver

The ‘files’ driver uses your file system for storing session data.

It can safely be said that it works exactly like PHP’s own default session implementation, but in case this is an important detail for you, have it mind that it is in fact not the same code and it has some limitations (and advantages).

To be more specific, it doesn’t support PHP’s directory level and mode formats used in session.save_path, and it has most of the options hard-coded for safety. Instead, only absolute paths are supported for $config['sess_save_path'].

Another important thing that you should know, is to make sure that you don’t use a publicly-readable or shared directory for storing your session files. Make sure that only you have access to see the contents of your chosen sess_save_path directory. Otherwise, anybody who can do that, can also steal any of the current sessions (also known as “session fixation” attack).

On UNIX-like operating systems, this is usually achieved by setting the 0700 mode permissions on that directory via the chmod command, which allows only the directory’s owner to perform read and write operations on it. But be careful because the system user running the script is usually not your own, but something like ‘www-data’ instead, so only setting those permissions will probable break your application.

Instead, you should do something like this, depending on your environment

mkdir /<path to your application directory>/sessions/chmod 0700 /<path to your application directory>/sessions/chown www-data /<path to your application directory>/sessions/

Bonus Tip

Some of you will probably opt to choose another session driver because file storage is usually slower. This is only half true.

A very basic test will probably trick you into believing that an SQL database is faster, but in 99% of the cases, this is only true while you only have a few current sessions. As the sessions count and server loads increase - which is the time when it matters - the file system will consistently outperform almost all relational database setups.

In addition, if performance is your only concern, you may want to look into using tmpfs, (warning: external resource), which can make your sessions blazing fast.

Database Driver

The ‘database’ driver uses a relational database such as MySQL or PostgreSQL to store sessions. This is a popular choice among many users, because it allows the developer easy access to the session data within an application - it is just another table in your database.

However, there are some conditions that must be met:

• Only your default database connection (or the one that you access as $this->db from your controllers) can be used.

• You must have the Query Builder enabled.

• You can NOT use a persistent connection.

• You can NOT use a connection with the cache_on setting enabled.

In order to use the ‘database’ session driver, you must also create this table that we already mentioned and then set it as your $config['sess_save_path'] value. For example, if you would like to use ‘ci_sessions’ as your table name, you would do this:

$config['sess_driver'] = 'database';$config['sess_save_path'] = 'ci_sessions';

Note

If you’ve upgraded from a previous version of CodeIgniter and you don’t have ‘sess_save_path’ configured, then the Session library will look for the old ‘sess_table_name’ setting and use it instead. Please don’t rely on this behavior as it will get removed in the future.

And then of course, create the database table ...

For MySQL:

CREATE TABLE IF NOT EXISTS `ci_sessions` (        `id` varchar(128) NOT NULL,        `ip_address` varchar(45) NOT NULL,        `timestamp` int(10) unsigned DEFAULT 0 NOT NULL,        `data` blob NOT NULL,
        KEY `ci_sessions_timestamp` (`timestamp`));

For PostgreSQL:

CREATE TABLE "ci_sessions" (        "id" varchar(128) NOT NULL,        "ip_address" varchar(45) NOT NULL,        "timestamp" bigint DEFAULT 0 NOT NULL,        "data" text DEFAULT '' NOT NULL);CREATE INDEX "ci_sessions_timestamp" ON "ci_sessions" ("timestamp");

You will also need to add a PRIMARY KEY depending on your ‘sess_match_ip’ setting. The examples below work both on MySQL and PostgreSQL:

// When sess_match_ip = TRUEALTER TABLE ci_sessions ADD PRIMARY KEY (id, ip_address);// When sess_match_ip = FALSEALTER TABLE ci_sessions ADD PRIMARY KEY (id);// To drop a previously created primary key (use when changing the setting)ALTER TABLE ci_sessions DROP PRIMARY KEY;

Important

Only MySQL and PostgreSQL databases are officially supported, due to lack of advisory locking mechanisms on other platforms. Using sessions without locks can cause all sorts of problems, especially with heavy usage of AJAX, and we will not support such cases. Use session_write_close() after you’ve done processing session data if you’re having performance issues.

Redis Driver

Note

Since Redis doesn’t have a locking mechanism exposed, locks for this driver are emulated by a separate value that is kept for up to 300 seconds.

Redis is a storage engine typically used for caching and popular because of its high performance, which is also probably your reason to use the ‘redis’ session driver.

The downside is that it is not as ubiquitous as relational databases and requires the phpredis PHP extension to be installed on your system, and that one doesn’t come bundled with PHP. Chances are, you’re only be using the ‘redis’ driver only if you’re already both familiar with Redis and using it for other purposes.

Just as with the ‘files’ and ‘database’ drivers, you must also configure the storage location for your sessions via the $config['sess_save_path'] setting. The format here is a bit different and complicated at the same time. It is best explained by the phpredis extension’s README file, so we’ll simply link you to it:

https://github.com/phpredis/phpredis#php-session-handler

Warning

CodeIgniter’s Session library does NOT use the actual ‘redis’ session.save_handler. Take note only of the path format in the link above.

For the most common case however, a simple host:port pair should be sufficient:

$config['sess_driver'] = 'redis';$config['sess_save_path'] = 'tcp://localhost:6379';

Memcached Driver

Note

Since Memcache doesn’t have a locking mechanism exposed, locks for this driver are emulated by a separate value that is kept for up to 300 seconds.

The ‘memcached’ driver is very similar to the ‘redis’ one in all of its properties, except perhaps for availability, because PHP’s Memcached extension is distributed via PECL and some Linux distrubutions make it available as an easy to install package.

Other than that, and without any intentional bias towards Redis, there’s not much different to be said about Memcached - it is also a popular product that is usually used for caching and famed for its speed.

However, it is worth noting that the only guarantee given by Memcached is that setting value X to expire after Y seconds will result in it being deleted after Y seconds have passed (but not necessarily that it won’t expire earlier than that time). This happens very rarely, but should be considered as it may result in loss of sessions.

The $config['sess_save_path'] format is fairly straightforward here, being just a host:port pair:

$config['sess_driver'] = 'memcached';$config['sess_save_path'] = 'localhost:11211';

Bonus Tip

Multi-server configuration with an optional weight parameter as the third colon-separated (:weight) value is also supported, but we have to note that we haven’t tested if that is reliable.

If you want to experiment with this feature (on your own risk), simply separate the multiple server paths with commas:

// localhost will be given higher priority (5) here,// compared to 192.0.2.1 with a weight of 1.$config['sess_save_path'] = 'localhost:11211:5,192.0.2.1:11211:1';

Custom Drivers

You may also create your own, custom session drivers. However, have it in mind that this is typically not an easy task, as it takes a lot of knowledge to do it properly.

You need to know not only how sessions work in general, but also how they work specifically in PHP, how the underlying storage mechanism works, how to handle concurrency, avoid deadlocks (but NOT through lack of locks) and last but not least - how to handle the potential security issues, which is far from trivial.

Long story short - if you don’t know how to do that already in raw PHP, you shouldn’t be trying to do it within CodeIgniter either. You’ve been warned.

If you only want to add some extra functionality to your sessions, just extend the base Session class, which is a lot more easier. Read the Creating Libraries article to learn how to do that.

Now, to the point - there are three general rules that you must follow when creating a session driver for CodeIgniter:

• Put your driver’s file under application/libraries/Session/drivers/ and follow the naming conventions used by the Session class. For example, if you were to create a ‘dummy’ driver, you would have a Session_dummy_driver class name, that is declared in application/libraries/Session/drivers/Session_dummy_driver.php.

• Extend the CI_Session_driver class. This is just a basic class with a few internal helper methods. It is also extendable like any other library, if you really need to do that, but we are not going to explain how ... if you’re familiar with how class extensions/overrides work in CI, then you already know how to do it. If not, well, you shouldn’t be doing it in the first place.

• Implement the SessionHandlerInterface interface. Note You may notice that SessionHandlerInterface is provided by PHP since version 5.4.0. CodeIgniter will automatically declare the same interface if you’re running an older PHP version.

The link will explain why and how.

So, based on our ‘dummy’ driver example above, you’d end up with something like this:

// application/libraries/Session/drivers/Session_dummy_driver.php:class CI_Session_dummy_driver extends CI_Session_driver implements SessionHandlerInterface{        public function __construct(&$params)        {                // DO NOT forget this
                parent::__construct($params);                // Configuration & other initializations        }        public function open($save_path, $name)        {                // Initialize storage mechanism (connection)        }        public function read($session_id)        {                // Read session data (if exists), acquire locks        }        public function write($session_id, $session_data)        {                // Create / update session data (it might not exist!)        }        public function close()        {                // Free locks, close connections / streams / etc.        }        public function destroy($session_id)        {                // Call close() method & destroy data for current session (order may differ)        }        public function gc($maxlifetime)        {                // Erase data for expired sessions        }}

If you’ve done everything properly, you can now set your sess_driver configuration value to ‘dummy’ and use your own driver. Congratulations!

Class Reference

class CI_Sessionuserdata([$key = NULL])

• $key (mixed) – Session item key or NULL

Returns:  Value of the specified item key, or an array of all userdata

Return type:  mixed

Gets the value for a specific `$_SESSION` item, or an array of all “userdata” items if not key was specified.

Note

This is a legacy method kept only for backwards compatibility with older applications. You should directly access $_SESSION instead.

all_userdata()

&get_userdata()

has_userdata($key)

• $key (string) – Session item key

Returns:  TRUE if the specified key exists, FALSE if not

Return type:  bool

Checks if an item exists in `$_SESSION`.

Note

This is a legacy method kept only for backwards compatibility with older applications. It is just an alias for isset($_SESSION[$key]) - please use that instead.

set_userdata($data[, $value = NULL])

• $data (mixed) – An array of key/value pairs to set as session data, or the key for a single item

• $value (mixed) – The value to set for a specific session item, if $data is a key

Return type:  void

Assigns data to the `$_SESSION` superglobal.

Note

This is a legacy method kept only for backwards compatibility with older applications.

unset_userdata($key)

• $key (mixed) – Key for the session data item to unset, or an array of multiple keys

Return type:  void

Unsets the specified key(s) from the `$_SESSION` superglobal.

Note

This is a legacy method kept only for backwards compatibility with older applications. It is just an alias for unset($_SESSION[$key]) - please use that instead.

mark_as_flash($key)

• $key (mixed) – Key to mark as flashdata, or an array of multiple keys

Returns:  TRUE on success, FALSE on failure

Return type:  bool

Marks a `$_SESSION` item key (or multiple ones) as “flashdata”.

get_flash_keys()

unmark_flash($key)

• $key (mixed) – Key to be un-marked as flashdata, or an array of multiple keys

Return type:  void

Unmarks a `$_SESSION` item key (or multiple ones) as “flashdata”.

flashdata([$key = NULL])

• $key (mixed) – Flashdata item key or NULL

Returns:  Value of the specified item key, or an array of all flashdata

Return type:  mixed

Gets the value for a specific `$_SESSION` item that has been marked as “flashdata”, or an array of all “flashdata” items if no key was specified.

Note

This is a legacy method kept only for backwards compatibility with older applications. You should directly access $_SESSION instead.

keep_flashdata($key)

• $key (mixed) – Flashdata key to keep, or an array of multiple keys

Returns:  TRUE on success, FALSE on failure

Return type:  bool

Retains the specified session data key(s) as “flashdata” through the next request.

Note

This is a legacy method kept only for backwards compatibility with older applications. It is just an alias for the mark_as_flash() method.

set_flashdata($data[, $value = NULL])

• $data (mixed) – An array of key/value pairs to set as flashdata, or the key for a single item

• $value (mixed) – The value to set for a specific session item, if $data is a key

Return type:  void

Assigns data to the `$_SESSION` superglobal and marks it as “flashdata”.

Note

This is a legacy method kept only for backwards compatibility with older applications.

mark_as_temp($key[, $ttl = 300])

• $key (mixed) – Key to mark as tempdata, or an array of multiple keys

• $ttl (int) – Time-to-live value for the tempdata, in seconds

Returns:  TRUE on success, FALSE on failure

Return type:  bool

Marks a `$_SESSION` item key (or multiple ones) as “tempdata”.

get_temp_keys()

unmark_temp($key)

• $key (mixed) – Key to be un-marked as tempdata, or an array of multiple keys

Return type:  void

Unmarks a `$_SESSION` item key (or multiple ones) as “tempdata”.

tempdata([$key = NULL])

• $key (mixed) – Tempdata item key or NULL

Returns:  Value of the specified item key, or an array of all tempdata

Return type:  mixed

Gets the value for a specific `$_SESSION` item that has been marked as “tempdata”, or an array of all “tempdata” items if no key was specified.

Note

This is a legacy method kept only for backwards compatibility with older applications. You should directly access $_SESSION instead.

set_tempdata($data[, $value = NULL])

• $data (mixed) – An array of key/value pairs to set as tempdata, or the key for a single item

• $value (mixed) – The value to set for a specific session item, if $data is a key

• $ttl (int) – Time-to-live value for the tempdata item(s), in seconds

Return type:  void

Assigns data to the `$_SESSION` superglobal and marks it as “tempdata”.

Note

This is a legacy method kept only for backwards compatibility with older applications.

sess_regenerate([$destroy = FALSE])

• $destroy (bool) – Whether to destroy session data

Return type:  void

Regenerate session ID, optionally destroying the current session’s data.

Note

This method is just an alias for PHP’s native session_regenerate_id() function.

sess_destroy()

__get($key)

• $key (string) – Session item key

Returns:  The requested session data item, or NULL if it doesn’t exist

Return type:  mixed

A magic method that allows you to use `$this->session->item` instead of `$_SESSION['item']`, if that’s what you prefer.

It will also return the session ID by calling session_id() if you try to access $this->session->session_id.

__set($key, $value)

• $key (string) – Session item key

• $value (mixed) – Value to assign to the session item key

Returns:  void

A magic method that allows you to assign items to `$_SESSION` by accessing them as `$this->session` properties:

$this->session->foo = 'bar';  // Results in: // $_SESSION'foo' = 'bar';

 ? 2014–2017 British Columbia Institute of Technology

Licensed under the MIT License.

https://www.codeigniter.com/user_guide/libraries/sessions.html