要格式化Windows 11中的USB驅動器，1. 使用文件資源管理器插入USB後右鍵選擇格式化，設置文件系統為exFAT並勾選快速格式化後點擊開始即可完成；2. 若驅動器異?？墒褂么疟P管理，通過Win X打開磁盤管理刪除分區並創建新簡單卷完成格式化；3. 也可通過管理員權限的命令提示符運行diskpart工具，選擇正確磁盤後執行clean、create partition primary、format fs=exfat quick和assign命令完成格式化，整個過程需謹慎核對磁盤編號以避免誤操作，最終驅動器將被成功格式化並可正常使用。

Formatting a USB drive in Windows 11 is a simple process that you can complete in just a few steps. Whether you're preparing the drive for a new use, fixing errors, or erasing all data, here's how to do it properly.

Using File Explorer (Easiest Method)

This is the most user-friendly way and works for most users.

1. Plug in your USB drive to an available USB port on your computer.
2. Open File Explorer (you can press Win E ).
3. In the left sidebar, click on This PC .
4. Under Devices and drives , locate your USB drive (it usually has a removable drive icon and a small capacity like 8GB, 16GB, etc.).
5. Right-click on the USB drive.
6. Select Format from the context menu.
7. A new window will appear with formatting options:
   • File system : Choose between:
     • NTFS – Best for large files and Windows-only use.
     • exFAT – Best for drives used between Windows and Mac (recommended for most USBs).
     • FAT32 – Compatible with almost everything, but can't handle files over 4GB.
   • Allocation unit size : Leave as Default unless you have a specific reason to change it.
   • Quick Format : Check this box for a faster format (recommended unless you suspect drive errors).
   • Quick Format unchecked performs a full scan and takes longer but checks for bad sectors.
8. Click Start .
9. A warning will appear saying all data will be erased. Click OK to confirm.
10. Wait for the process to finish, then click OK again.

Your USB drive is now formatted and ready to use.

Using Disk Management (For Advanced Users)

Use this if the drive isn't showing up in File Explorer or has multiple partitions.

1. Press Win X and select Disk Management .
2. Locate your USB drive in the list at the bottom (check the size to confirm).
3. If the drive has multiple partitions, right-click each one and select Delete Volume until the entire drive shows as Unallocated .
4. Right-click the unallocated space and choose New Simple Volume .
5. Follow the wizard to assign a drive letter, choose a file system (again, exFAT is usually best), and complete formatting.

Using Command Prompt (For Quick or Troubleshooting Use)

This method is fast and useful if GUI methods fail.

1. Press Win X and choose Terminal (Admin) or Command Prompt (Admin) .
2. Type the following command and press Enter:

    diskpart

3. Then run:

    list disk

   Identify your USB drive by size.

4. Select the drive (replace X with your USB disk number):

    select disk X

   ?? Be careful—selecting the wrong disk can erase your hard drive.

5. Clean and reformat:

    clean
   create partition primary
   format fs=exfat quick
   assign
   exit

The drive will be fully formatted and assigned a new letter.

Tips to Keep in Mind

• Back up your data first – Formatting erases everything.
• Use exFAT for flash drives – It works across Windows, Mac, and many devices, unlike NTFS or FAT32 limitations.
• If the format fails , the drive might be damaged or write-protected. Try updating USB drivers or checking for a physical lock switch (on some SD adapters or older drives).

Basically, just use File Explorer unless you run into issues—then fall back to Disk Management or Command Prompt. It's not complicated, but double-check you're formatting the right drive.

以上是如何在Windows 11中格式化USB驅動器的詳細內容。更多資訊請關注PHP中文網其他相關文章！