如果Mac沒有恢復分區，可以通過創建外部可啟動安裝器來安裝macOS。具體步驟如下：1. 使用至少12GB的U盤下載macOS安裝程序（如Ventura、Monterey或Big Sur），並通過磁盤工具將其格式化為“Mac OS Extended (Journaled)”。 2. 在終端中運行createinstallmedia命令，將U盤轉換為可啟動安裝器。 3. 關閉Mac並插入U盤，開機時按住Option鍵選擇U盤啟動。 4. 進入macOS安裝環境後，使用磁盤工具選擇內部硬盤並格式化為APFS或Mac OS Extended。 5. 最後按照屏幕提示完成macOS安裝，安裝過程大約需要20至40分鐘，完成後Mac會自動重啟進入設置助手。

If your Mac doesn't have a recovery partition, installing macOS might feel tricky at first, but it's definitely doable. The key is to create an external bootable installer and use that to get the job done.

Here's how you can handle it step by step:

Create a bootable macOS installer on a USB drive

To install macOS without a recovery partition, you'll need a USB flash drive (at least 12GB or more) to make a bootable installer. Apple provides tools for this, and it's straightforward if you follow the right steps.

• Download the macOS installer from the App Store (like Ventura, Monterey, or Big Sur — depends on what your Mac supports).

  

• Plug in your USB drive and format it using Disk Utility: name it something like “MacOS Install,” and choose "Mac OS Extended (Journaled)" as the format.

• Open Terminal and run the createinstallmedia command. For example, if you downloaded Ventura, the command would look like:

   sudo /Applications/Install\ macOS\ Ventura.app/Contents/Resources/createinstallmedia --volume /Volumes/MacOS\ Install

This process will erase the USB drive and turn it into a full macOS installer.

Boot from the USB installer

Once you've created the bootable USB, you're ready to start the installation process.

• Shut down your Mac.
• Plug in the USB drive.
• Turn on your Mac while holding the Option (?) key — this brings up the startup manager where you should see your USB drive listed.
• Select the USB volume and press Enter to boot from it.

From here, you'll land in the macOS Installer environment, which includes Disk Utility and the actual macOS installation option.

Use Disk Utility to prepare your internal drive

Before installing macOS, you need to make sure your internal drive is formatted correctly.

• From the installer screen, go to Utilities > Disk Utility .
• Select your main internal drive (not just a partition), and click "Erase."
• Choose APFS (or Mac OS Extended if needed) as the format, depending on your Mac model and macOS version.
• Give it a name like “Macintosh HD” and proceed with erasing.

Once that's done, close Disk Utility and proceed to install macOS on the newly formatted drive.

Install macOS from the installer

Now that your drive is ready, the last step is to actually install macOS.

• Follow the on-screen instructions — select your target disk (the one you just erased), and let the installer do its thing.
• It may take 20–40 minutes depending on your hardware.
• Once installed, your Mac should restart automatically and boot into the setup assistant.

Make sure to keep your USB installer handy in case you ever need to repair or reinstall macOS again.

That's basically all there is to it. You don't need a recovery partition if you've got a bootable installer ready. Just remember to match macOS versions to your Mac's compatibility, and double-check the formatting steps so everything boots properly.

以上是如何在沒有恢復分區的情況下在Mac上安裝MACO？的詳細內容。更多資訊請關注PHP中文網其他相關文章！