若鍵盤在克隆硬盤後無法工作，通常是因驅動衝突或系統配置不匹配。 1. 檢查驅動衝突：進入設備管理器，卸載或更新“鍵盤”和“人機界面設備”中的舊驅動，重啟後讓系統自動重裝；2. 進入安全模式測試：通過F8或Shift F8進入安全模式，確認鍵盤是否可用，若可用則問題可能由第三方驅動或軟件引起，可嘗試乾淨啟動排查；3. 確認系統分區正確：使用磁盤管理或diskpart檢查正確分區是否標記為“活動”或包含正確的EFI啟動文件；4. 考慮硬件差異：若克隆至不同電腦或硬件變化大，可嘗試修復安裝或重新安裝Windows以適配新硬件。

If your keyboard isn't working after cloning a drive, it's usually due to driver conflicts or system configuration mismatches. This kind of issue often pops up when moving Windows from one drive to another, especially if hardware differences are involved.

Check for Driver Conflicts

After cloning, Windows might be holding onto outdated or incorrect drivers, especially for your chipset or HID (Human Interface Devices) controllers. These can interfere with basic input devices like keyboards.

• Open Device Manager
• Look under “Keyboards” and “Human Interface Devices”
• Right-click your keyboard device and choose "Uninstall device"
• Reboot — Windows will attempt to reinstall the correct drivers automatically

You can also try updating the drivers manually by selecting "Update driver" instead of uninstalling.

Sometimes, rolling back to an older version of the driver helps if the current one is causing issues.

Boot into Safe Mode and Test

Safe Mode loads only essential drivers, which can help isolate the problem.

• Restart and press F8 or Shift F8 during boot (or use recovery options if that doesn't work)
• Select Safe Mode
• See if the keyboard works there

If it does, the issue is likely caused by a third-party driver or software interfering in normal mode.

• Try a clean boot (disable non-Microsoft services and startup apps) to narrow down what's conflicting

Make Sure the System Partition Is Set Correctly

When you clone a drive, sometimes the system partition (the small hidden one with boot files) isn't copied correctly or marked as active.

• Use Disk Management or diskpart in Command Prompt to check partitions
• Confirm the correct partition is marked as “Active”

If you're using UEFI instead of BIOS, make sure the EFI partition was properly cloned and contains the right boot files.

Consider Hardware Differences

If you moved the cloned drive to a different machine or changed components significantly, Windows may not recognize the new hardware setup.

This can cause all sorts of issues, including keyboard problems. In this case:

• Try doing a repair install of Windows using the same product key
• Or completely reinstall Windows on the new hardware

Windows tends to tie itself closely to the original hardware configuration, so major changes can throw things off.

Fixing this issue usually comes down to checking drivers, boot settings, and compatibility with the current hardware setup. It's not complicated, but it can take a few tries to hit the right fix depending on the root cause.

以上是如何修復克隆驅動器後無法工作的鍵盤的詳細內容。更多資訊請關注PHP中文網其他相關文章！