當Windows無法啟動時，可按以下步驟排查：首先檢查電源連接、外設和顯示器；其次嘗試進入安全模式排除驅動或軟件衝突；接著使用內置恢復工具修復啟動問題；最後考慮系統還原或重置。多數情況下無需擔心數據丟失，逐步操作通常能解決問題。

When Windows won't start, it can be frustrating, especially if you need to access files or get work done. The good news is, not all startup issues mean your system is beyond repair. In many cases, you can troubleshoot and fix the problem without losing data. Here's what you can do when Windows won't boot.

Check the Basics First

Before diving into complex fixes, make sure the issue isn't something simple:

• Power connection : If you're using a desktop, check that the power cable is securely plugged in. For laptops, try plugging it in — sometimes it appears dead but just needs charging.
• External devices : Unplug everything except the keyboard and mouse. Faulty USB drives, printers, or even a phone charging through USB can prevent Windows from starting.
• Monitor connection : If you see no display at all, double-check your monitor cable or try a different screen to rule out display issues.

Sometimes, the system might actually be booting fine, but you're just not seeing it due to an external device or display problem.

Try Safe Mode for Troubleshooting

If Windows starts but doesn't fully load (you might see a logo then a black screen), try entering Safe Mode. This mode loads only essential drivers and services, which helps identify software-related issues.

To enter Safe Mode:

1. Force shut down the computer by holding the power button for 10 seconds. Do this three times in a row — on the third attempt, Windows will usually go into recovery mode.
2. From there, choose “Troubleshoot” > “Advanced options” > “Startup Settings” > “Restart.”
3. After rebooting, press the number key corresponding to “Enable Safe Mode with Networking.”

Once in Safe Mode:

• Uninstall recent drivers or software updates
• Run a virus scan
• Check for hardware conflicts in Device Manager

If Windows boots in Safe Mode but not normally, the issue is likely related to a startup program or driver conflict.

Use Recovery Tools Built Into Windows

Windows has built-in recovery tools that can help fix boot problems without needing another PC or installation media.

Here's how to use them:

• When your PC fails to start after a few tries, it should automatically open the Automatic Repair screen. Let it run — it often fixes common boot configuration issues.
• If that doesn't work, go to “Troubleshoot” > “Advanced options” > “Command Prompt.” Then run:

   bootrec /fixmbr
  bootrec /fixboot
  bootrec /rebuildbcd

These commands repair the Master Boot Record, write a new boot sector, and rebuild the boot configuration database — all common culprits in startup failures.

Consider System Restore or Reset

If none of the above works, you have two main options:

• System Restore : If you know when things were working fine, restore your system to that point. This won't delete your personal files, just system settings and installed programs.
• Reset This PC : As a last resort, you can reset Windows. You'll have the option to keep your files or remove everything. This reinstalls Windows and can resolve deep-rooted issues.

Both options are available under “Troubleshoot” > “Advanced options” in the recovery environment.

There are plenty of reasons why Windows might refuse to start — from corrupted files to faulty drivers — but most of the time, you don't need to panic. Go step by step through these options, and chances are you'll find one that gets you back up and running.基本上就這些.

以上是Windows無法啟動時該怎麼辦的詳細內容。更多資訊請關注PHP中文網其他相關文章！