如果Windows無法啟動，可以嘗試以下步驟修復而不丟失數據：1. 使用WinRE進行啟動修復或命令提示符執行bootrec命令；2. 通過USB啟動進入文件恢復模式備份重要文件；3. 利用Windows安裝介質進行修復安裝，保留個人文件和應用。這些方法可有效解決多數啟動問題且避免數據丟失。

If your Windows won't start, it's definitely stressful — especially if you're worried about losing files, documents, or personal data. The good news is, in many cases, you can fix the issue without wiping everything and starting over. You just need to know the right steps to take.

Use Windows Recovery Environment (WinRE)

When Windows doesn't boot at all, one of the first places to go is the Recovery Environment , or WinRE. It gives you access to tools that can help repair startup issues without touching your files.

• To get into WinRE:
  • Turn off your PC by holding the power button.
  • Turn it on again and immediately start pressing the Power button repeatedly until it shuts down — this tricks Windows into thinking there's a problem and boots into recovery mode.
  • Alternatively, if you have a working keyboard, try pressing F8 or Shift F8 during boot (though this method may not work on newer systems).

Once inside WinRE:

• Go to Troubleshoot > Advanced Options
• Try Startup Repair , which scans for boot-related problems
• If that doesn't work, use Command Prompt to run bootrec /fixmbr , bootrec /fixboot , bootrec /rebuildbcd — these commands often resolve boot record issues

Just remember: this works best if the hard drive itself is still healthy and your system partition isn't corrupted beyond repair.

Access Your Files Through File Recovery Mode

If you're not sure whether the problem is with Windows or the hardware, and you want to make absolutely sure your files are safe before trying deeper fixes, you can boot from a USB drive or external media and copy your files somewhere safe.

• Grab another computer and create a Windows installation USB drive using Microsoft's Media Creation Tool
• Plug it into your broken PC and restart while pressing Esc, F12, or another key (varies by manufacturer) to open the boot menu
• Select the USB as the boot device
• When the Windows setup screen appears, don't install anything — instead, press Shift F10 to open Command Prompt
• From here, you can navigate through your drives using basic commands like dir D:\ and copy files to an external drive using something like copy D:\Users\YourName\Documents E:\Backup

This way, even if things go sideways later, your important data is already backed up.

Repair Install Using Windows Setup

If you want to actually fix Windows but keep your files, apps, and settings intact, a repair install is your best bet. This process replaces core system files without deleting your personal data.

Here's how:

• Boot from the Windows installation USB (as described above)
• Instead of doing a clean install, choose Repair your computer in the bottom-left corner
• Go to Troubleshoot > Advanced Options > Command Prompt
• Then follow the same bootrec commands as before
• Or, if that doesn't work, you can do a full in-place upgrade , which installs Windows over itself — choose “Install Now” but when asked whether to perform a clean install or upgrade, select Keep personal files and apps

Just be aware: some apps might break after this, especially if they were installed in non-standard ways or rely on specific system configurations.

Final Thoughts

You don't always have to wipe your drive when Windows won't start. Whether it's a boot configuration error, corrupted system files, or something else, there are several options to get back on track without losing your stuff. Just move carefully, back up what you can early on, and follow each step closely.

That's basically it — nothing too fancy, but enough to save your data and possibly your whole system.

以上是如何修復窗口而不會丟失數據的詳細內容。更多資訊請關注PHP中文網其他相關文章！