Finally, the Nintendo Switch 2 has arrived in all its glory. However, with gamers finally getting their hands on Nintendo's much-anticipated successor to the Switch, there is an increased demand for console cleanliness.

But what is the best way to keep your console looking as good as the day you bought it? When it comes to cleaning electronics, less is often more. This guide will provide you with advice on how to clean every component, the materials you should use, and even the best way to keep the screen streak-free.

How To Clean The Nintendo Switch 2

When cleaning the Nintendo Switch 2, there are three key aspects you'll want to observe.

1. Turn the console off.
2. Use water.
3. Use a non-abrasive cleaning cloth.

Nintendo's official instructions for cleaning the original Nintendo Switch will largely still apply. Ideally, you want to avoid using harsh chemicals. Dampening a microfiber cloth with distilled water and gently wiping will be sufficient to keep your Switch 2 looking pristine. Make certain you wring the cloth out before you use it to wipe down the console. It should not be wet enough that it is dripping or leaving beads of water behind.

What Cleaning Solutions To Use When Cleaning The Nintendo Switch 2

The best liquid to use for cleaning is always going to be distilled water (applied to a cloth). For the most part, you shouldn't need anything more than that. However, for disinfecting the console itself, Nintendo officially recommends that you use a "consumer-grade disinfectant containing 70 percent alcohol".

You should be cautious before turning to chemicals as people have damaged their Switch consoles in the past by using isopropyl alcohol. While isopropyl alcohol is safe for cleaning electronic components (when they are turned off), and dries very quickly, it can be corrosive to plastics.

For that reason alone, avoid using pure isopropyl alcohol to clean the console. If you are absolutely driven to disinfect the console, follow Nintendo's guidance and look for a disinfectant that contains that 70 percent alcohol formulation.

What Type Of Cloth To Use When Cleaning The Nintendo Switch 2

We specifically recommend that you use a microfiber cloth, as the microfibers create the least abrasive surface. However, it is important to note that they can generate more static electricity. That is why you should always clean your Switch 2 while the console is turned off. We are encouraging caution here, not because we have heard accounts of the static buildup from these cloths causing damage to consoles, but because the Switch 2 is expensive, and it is better to be safe than sorry.

How To Clean The Nintendo Switch 2's Screen Without Leaving Streaks

The key to not leaving streaks is to use a microfiber cleaning cloth, apply very little pressure, and utilize a circular pattern. Screen cleaners are generally overkill. All you need is water (ideally distilled) to dampen a cloth, light pressure, and a microfiber cloth. As we've already stated previously, just make sure you wring out the microfiber cloth before you apply it to the console itself. If the cloth is leaving water droplets behind, it is too wet!

How To Clean Around The Buttons And Sticks Of The Nintendo Switch 2

Over time, dust and debris will wedge themselves into the tiny crevices surrounding the buttons of the Switch 2. The easiest way to clean these crevices out is by using a toothbrush. I’d recommend purchasing a soft-bristle toothbrush specifically for this purpose. Don’t scrub in the crevices; instead, nestle the bristles into the crevices gently, then flick dust and debris away from the console.

Don’t wet the brush. We want to avoid moisture from getting in behind the Switch 2’s components.

The above is the detailed content of Nintendo Switch 2: How To Clean Your Console. For more information, please follow other related articles on the PHP Chinese website!